A virtual press conference from Sound & Video Contractor

QSC INTRODUCES NEW SURFACE MOUNT SUBWOOFER

ADS28TwDual eight-inch system is ideally suited for large or small applications

COSTA MESA, CA, February 9, 2009—As the latest addition to QSC’s AcousticDesign Series, the model AD-S28Tw surface mount subwoofer is acoustically matched to all other offerings within the AD Series. Shipped with a spec sheet revealing a continuous power handling capacity of 250 watts and capabilities for managing up to 700 watt peaks, the new subwoofer has a 70/100 volt multi-tap transformer with eight ohm bypass, frequency response of 42 Hz-165 Hz, and sensitivity of 94 dB (1W/1m).

Central to the AD-S28Tw’s high performance prowess are a pair of eight-inch woofers outfitted with polypropylene cones for added protection in humid environments. The loudspeaker’s bandpass enclosure incorporates a pair of chambers: One that is completely sealed, and another with a large port. Giving added precision to low frequency extension down to 36 Hz, the highly efficient design is further complemented by an onboard low-pass filter set at 120 Hz.

Featuring marine-grade plywood construction, a zinc-plated steel grille with a black foam backing, molded ABS endcaps, and a rotatable logo, the AD-S28Tw enclosure has additionally been fitted with a recessed rear input panel covered by a hinged door. Nickel-plated input and output terminals found on the subwoofer accept wiring ranging from 18 AWG to 12 AWG. One switch selects between the 70/100V transformer taps, while another enables or disables the passive low-pass filter.

Adding to the versatility of the AD-S28Tw, attached rubber feet allow the device to be used on either the floor or a shelf. Forged-shoulder eyebolts, a steel yoke, and all related hardware are additionally included with each loudspeaker to offer options for suspended installation.

QSC Audio Products, Inc. is a leading manufacturer of power amplifiers, loudspeakers, signal processing, digital signal transport, and computer control systems for professional audio markets worldwide. For more information, contact QSC Audio Products, Inc., 1675 MacArthur Blvd., Costa Mesa, CA 92626 USA. Phone: 800-854-4079 (USA only) or 714-754-6175. Fax: 714-754-6174. E-mail: info@qscaudio.com, or visit www.qscaudio.com.

Contacts:
Gregory A. DeTogne
Gregory A. DeTogne Public Relations
847-367-8187
greg@detogne.net

LECTROSONICS TM400 DEPLOYED AT CHURCHILL DOWNS FOR WIRELESS TEST & MEASUREMENT
SMPTE Confers ‘Fellow’ Status on Eight Members of Motion-Imaging Technology Industry
Music Mix Mobile Streamlines On-Location Audio Recording Workflows With Sonnet’s Echo Express III-R and xMac mini Server
Nexidia and Telestream Announce Integration of Nexidia QC Caption Verification Tool Into Vantage Workflow Automation Environment
SMPTE Announces 2014 Honorees and Award Winners
Biamp Systems Tesira(R) Brings Interactive Audio to Queensland University of Technology
HARMAN Professional to Unveil New Products at BIRTV 2014 In Beijing
D-Tools Announces SI 2015 Launch Event Sponsors
Triad Speakers, Inc. Unveils New Speaker for Dolby Atmos Sound
Clay Paky Sharpys and grandMA2 Consoles Hit the Road with Journey and the Steve Miller Band’s Summer Tour

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

February 2009
M T W T F S S
« Jan   Mar »
 1
2345678
9101112131415
16171819202122
232425262728  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication