A virtual press conference from Sound & Video Contractor

HARMAN’s Crown Introduces Its DriveCore Install Series Power Amplfiers: The New Standard for Installed Sound

AMSTERDAM, The Netherlands — In a move that reaffirms its position as the leading provider of professional audio power amplifiers, HARMAN’s Crown Audio today announced the introduction of its DriveCore Install (DCi) Series power amplifiers. Successor to the company’s acclaimed CTs Series, the new DCi Analog stereo and multichannel amplifiers incorporate a host of improvements including HARMAN’s exclusive DriveCore™ technology to set new industry standards in reliability, sound quality, flexibility and efficiency.

Twelve models in the DCi Series are available ranging from 300 watts to 600 watts (into 4 and 8 ohms and 70Vrms and 100Vrms). The first number in the model is the amount of channels and the second number indicates the watts-per-channel power rating. All amplifiers are just 2U rack spaces high, to conserve valuable installation space.

“In introducing the DCi Series we had to exceed the benchmarks set by our acclaimed CTs Series, which has established itself as the de facto amplifier standard for installed sound applications,” said Daniel Saenz, Business Segment Manager, Install Sound, Crown. “It was no easy task, but our new DCi Series offers an entirely new level of unsurpassed performance that will be appreciated by audio professionals worldwide.”

At the heart of the DCi Series is HARMAN’s proprietary DriveCore amplifier IC chip. The DriveCore chip combines the amplifier driver stage into the power output stage along with additional audio-signal functions – yet is about the size of a postage stamp. DriveCore and the DCi Series’ leading-edge amplifier topologies dramatically reduce size and power consumption requirements and yield much more energy-efficient operation that conforms to HARMAN International’s GreenEdge™ environmental initiative.

DriveCore technology dramatically reduces the footprint of the amplifier by replacing over 500 parts from a typical amplifier design with one single IC. Smaller amplifier engines means more channels can be put into a 2 RU box with more capabilities.

Crown DCi Series amplifiers can be operated into 8-, 4- or 2-ohm loads and offer direct drive “constant voltage” capabilities for 70Vrms and 100Vrms amplification without the need for a step-up transformer, yielding higher audio quality in distributed audio applications. The amplifiers incorporate an exclusive Power Factor Corrected Global Power Supply that is designed to deliver maximum power in any country and their universal AC input accepts voltages from 100 – 240 VAC, 50/60Hz (+/- 10%).

The DCi Series is Crown’s greenest amplifier line ever, with a Power Factor Corrected (PFC) power supply, a selectable powersave auto-standby mode where the amplifier will power down after 30 minutes of no input signal and consume less than 1 watt. In addition to the amplifiers’ balanced 3-pin input connectors and 2-pin terminal strip output connectors, a rear-panel AUX port enables the amplifiers to be integrated into control systems for remote on/off and amplifier fault monitoring.

Crown DCi Series amplifiers are built for the most demanding conditions of continuous professional use and carry a 3-year, no-fault fully transferrable warranty.

Crown DCi Series amplifiers will be available in Spring 2013.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets – supported by 15 leading brands, including AKG, Harman Kardon, Infinity, JBL, Lexicon and Mark Levinson. The company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 20 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,400 people across the Americas, Europe and Asia, and reported sales of $4.4 billion for the fiscal year ended June 30, 2012.

The Ultimate Sonic Journey: Mastering Engineer Maor Appelbaum Relies on the Sennheiser HD 600 As a Critical Listening Tool in Creating New Yes Album
The Refuge Selects LynTec Relay Panels for New North Carolina Campus
Sohonet Appoints Chuck Parker to Executive Chairman
Nouvelle Star’s Amel Bent Takes SSL Live on the Road for 2014 Instinct Tour
Slamhammer and Martin Audio Step Up At All-Star Game Concert
Dreamsound Is Poland’s First Post-Production Studio to Adopt Dolby Atmos Powered By HARMAN’s JBL and Crown
Crutchfield Designs Loud and Bulletproof Sound System for Trinity Irish Pub With HARMAN’s JBL Professional Loudspeakers
Video Devices PIX 260 Captures Footage Fit for a King as Part of The Royal Society Headquarters Refit
MediaStar Evolution Streams News Throughout US Institute of Peace Building in Washington
San Antonio’s Tobin Center for the Performing Arts Chooses grandMA2 Consoles and Clay Paky Lighting for Performance Spaces

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

February 2013
M T W T F S S
« Jan   Mar »
 123
45678910
11121314151617
18192021222324
25262728  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication