A virtual press conference from Sound & Video Contractor

Archive by Lori Hazen

General Cable Debuts Gepco® Brand’s Breakthrough 7.2 mm Hybrid Fiber at CCW 2013

NEW YORK, NEW YORK, NOVEMBER 13, 2013 — General Cable is pleased to debut a breakthrough in hybrid fiber cabling for mobile and permanent install SMPTE applications with the new Gepco® Brand HDC720HD 7.2 mm Hybrid Fiber Cable at the 2013 Content and Communications World (CCW) conference and exhibition (Booth #1311) in New York City November 13-14, 2013. Radically different from typical industry products, the HDC720HD is the first piece of a patent-pending hybrid fiber system that solves the most common durability issues associated with SMPTE camera cables in a smaller, lightweight design.

The revolutionary construction of the HDC720HD starts with eliminating the typical heavy steel strength member which often contributes to premature cable failure due to different expansion and contraction rates of the individual elements within the SMPTE hybrid fiber cable during temperature extremes. In the HDC720HD, the steel is replaced by a Kevlar® strength member that has the same pull strength of steel, but is lighter and more flexible. Unlike steel, the Kevlar strength member expands and contracts at the same rate as the glass members. Using Kevlar in place of steel also means the cable has virtually no memory making the cable easier to pay off, lay flat and wind back up on the drum.

For further durability, the HDC720HD utilizes bend-insensitive fiber elements with very low attenuation and a bend radius of 0.2 mm—versus 2.0 mm for traditional single-mode fiber—in a breakout style with additional Kevlar protection around the individual fibers.

In the HDC720HD, the typical outer braid is replaced with two 18 AWG drain wires that allow the cable to be more flexible, lighter and smaller in diameter. The master jacket of HDC720HD is polyurethane, which is tougher than PVC for rugged outdoor use, and its glossy finish reduces the pickup of dirt and debris from outside applications, making it easier to keep clean.

With a 31-percent smaller diameter and a 40 percent weight savings over 9.2 mm cables, HDC720HD allows 300 meters of cable on a drum in the same space and with less weight than 200 meters of 9.2 mm cable occupies.

“The new HDC720HD cable fixes so many of the common issues with SMPTE hybrid fiber camera cables with the added bonus of being smaller and lightweight,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “This makes the HDC720HD extremely ideal for use in portable applications and with high-definition Steadicams.”

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of aluminum, copper, and fiber optic wire and cable products for the energy, construction, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

Digg Syndication Del.icio.us Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: Cables, News, Tradeshow News |

General Cable Highlights Gepco® Brand Time-Saving Online Tool and Cables at 135th AES Convention

NEW YORK, NEW YORK, OCTOBER 18, 2013 — General Cable will focus on time savings as it highlights its Gepco® Brand Online Paneldesigner™ and Gepco® Brand RunONE™ Powered Cables at the 135th AES Convention (Booth # 2540) in New York City October 18-20, 2013. With Paneldesigner, the user-friendly, visual interface for designing custom panels; and RunONE Powered Cables, a portable and fast solution that combines power, audio and optional data under a single durable and flexible jacket; users can free up their time and energy for other critical tasks at hand.

From wall plates to custom rack-mountable chassis, Gepco has long been able to produce almost any type of custom panel for Broadcast or Professional A/V applications. Now, Paneldesigner’s time-saving, visual interface allows the user to choose the panel type, size, material, finish, connectors and lettering options so the user can quickly and easily submit his or her custom panel for a quote or order. Expandable menus provide easy reference for the multitude of connectors available, while the drag and drop interface makes designing a panel simple.

A user can get started with just a few clicks by typing in an email and password. When registering for a full account, all of the user’s projects can be stored within the account and edited and referenced at any time. The online Paneldesigner is available for use and can be found on the Gepco.com Website.

With multiple uses for corporations, DJs, lighting rigs and tours, RunONE Powered Cables allow the user to pull a single cable in place of multiple cables, providing a portable and neat solution that saves time and hassle. Each RunONE cable combines one channel of power with two, eight or 12 channels of 110 Ohm balanced audio for line level, mic level or digital AES audio signals and can be used with self-powered speakers or in DMX lighting control. Additional configurations of RunONE include two channels of Category 5e cable that can be used for data drops in remote power and audio applications. Snakes with optional data can also be used for digital audio transmission while sending power to Front of House (FOH) for remote locations. Shielding around the power channels eliminates power noise from interrupting the audio/data signal, ensuring high-quality performance.

RunONE cables come in both Professional and Touring versions. The Touring Line of RunONE Cables is designed with larger-gauge (12 AWG) power conductors to provide a lower voltage drop for long-distance runs and an overall shield that reduces outside noise often encountered during those longer runs.

Terminated with industry-standard connectors, RunONE cables offer the option of Edison, IEC and Neutrik® powerCON® connectors for the power channel; 3-pin XLR, 5-pin XLR (for DMX lighting), TRS and Neutrik® convertCON® connectors for audio channels; and RJ45 and Neutrik® etherCON® connectors for optional data channels. RunONE cables are available in pre-defined and custom configurations.

“We’re always looking for ways to make things easier and save time for our customers, so we’re pleased to provide tools and cables that do just that,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products.

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of aluminum, copper, and fiber optic wire and cable products for the energy, construction, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

General Cable Unveils Latest Gepco® Brand Innovations in Hybrid Fiber Cabling and Accessories at IBC 2013

WOOD DALE, IL, SEPTEMBER 13, 2013 — General Cable (IBC Stand 11.G61) will unveil its breakthrough Gepco® Brand HDC720HD 7.2 mm Hybrid Fiber Cable and new Gepco® Brand SMPTE-304TS Hybrid Fiber Cable Tester at the International Broadcasting Convention (IBC) in Amsterdam September 13-17, 2013.

A leap forward in hybrid fiber cabling for mobile and permanent install SMPTE applications, the new Gepco® Brand HDC720HD 7.2 mm Hybrid Fiber Cable is the first piece of a patent-pending hybrid fiber system that solves the most common durability issues associated with SMPTE camera cables in a smaller, lightweight design.

The revolutionary construction of the HDC720HD starts with eliminating the typical heavy steel strength member, which often contributes to premature cable failure due to different expansion and contraction rates of the individual elements within the SMPTE hybrid fiber cable during temperature extremes. In the HDC720HD, the steel is replaced by a strength member that has the same pull strength of steel, but is lighter and more flexible. Unlike steel, this strength member expands and contracts at the same rate as the glass members. Using this new strength member in place of steel also means the cable has virtually no memory, making the cable easier to pay off, lay flat and wind back up on the drum.

For further durability, the HDC720HD utilizes bend-insensitive fiber elements with very low attenuation and a bend radius of 0.2 mm—versus 2.0 mm for traditional single-mode fiber—in a breakout style with additional Kevlar protection around the individual fibers.

In the HDC720HD, the typical outer braid is replaced with two 18 AWG drain wires that allow the cable to be more flexible, lighter and smaller in diameter. The master jacket of HDC720HD is polyurethane which is tougher than PVC for rugged outdoor use, and its glossy finish reduces the pickup of dirt and debris from outside applications making it easier to keep clean.

With a 31 percent smaller diameter and a 40 percent weight savings over 9.2 mm cables, HDC720HD allows 300 meters of cable on a drum in the same space and less weight than 200 meters of 9.2 mm cable occupies.

“The new HDC720HD cable fixes so many of the common issues with SMPTE hybrid fiber camera cables with the added bonus of being smaller and lightweight,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “This makes the HDC720HD extremely ideal for use in portable applications and with high-definition Steadicams.”

Also debuting at IBC, the Gepco® Brand SMPTE-304TS Hybrid Fiber Cable Tester is ideal for use in sports/events broadcasting, fixed and mobile facilities or wherever a SMPTE HD camera cable is used. The SMPTE-304TS tests both electrical and optical circuits while the intuitive display graphically depicts which contact is defective or pinned out incorrectly.

Compatible with all SMPTE 304 standard connectors, the SMPTE-304TS has a portable, hand-held design and provides over 40 hours of continuous use without recharging, while the diagnostic OLED backlit display can be easily seen in direct sunlight or at night. Each SMPTE-304TS test set includes a metering unit and optical source unit with black aluminum frames, a rechargeable NiMH battery with charger, a USB to USB-mini charging cable and a rugged ABS plastic carrying case.

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of aluminum, copper, and fiber optic wire and cable products for the energy, construction, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

Gepco® Brand Expanded DMX Lighting Solutions Featured at the 2013 InfoComm Show

ORLANDO, FLORIDA, JUNE 12, 2013 — General Cable is pleased to offer its expanded line of Gepco® Brand DMX lighting solutions at the 2013 InfoComm Show (Booth #343) June 12-14, 2013.

Addressing industry demands and customer needs, Gepco has added DLC122 and DLC222 to its Gepco® Brand DLC Series DMX Lighting Control Cables. The new cables are designed with larger 22 AWG power conductors for use in extended distance runs without signal loss and feature an extremely durable and abrasion-resistant, yet flexible, polyurethane jacket. Ideal for heavy production use, rigging and touring conditions, DLC122 and DLC222 join DLC124 and DLC224 in the DLC Series.

The DLC series lighting control cable is a true DMX cable with an exceptionally durable and flexible construction. The series features 120 Ohm impedance, low capacitance, double (foil and braid) shield and color-coded conductors for easy identification. Unlike conventional cables that are not intended for data transmission, the DLC series offers reliable data transfer through its data-specific design. The single- and dual-pair designs of the DLC series accommodate multiple lighting manufacturers’ products, and the DLC222 and DLC224 meet the United States Institute for Theater Technology (USITT) standards for DMX512 cable specifications.

“Gepco and General Cable are happy to respond to customer needs,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “The new additions to the Gepco Brand DLC series will provide better performance for DMX lighting control in tough, heavy-production and touring conditions.”

Terminated with industry-standard connectors, the DLC series of cables are available in pre-defined and custom configurations with the option of 3-pin or 5-pin XLR connectors.

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

Gepco® Brand’s Touring Line of RunONE™ Powered Cables Debuted at the 2013 InfoComm Show

ORLANDO, FLORIDA, JUNE 12, 2013 — General Cable is pleased to announce the expansion of the Gepco® Brand Line of RunONE™ Powered Cables to include a version specifically for touring and production use at the 2013 InfoComm Show (Booth #343) June 12-14, 2013.

RunONE™ Powered Cables combine audio and power, along with optional data, under a single durable, yet flexible jacket. With multiple uses for corporations, DJs, lighting rigs and tours, RunONE allows the user to pull a single cable in place of multiple cables, providing a portable and neat solution that saves time and hassle.

Each RunONE cable combines one channel of power with two, eight or 12 channels of 110 Ohm balanced audio for line level, mic level or digital AES audio signals and can be used with self-powered speakers or in DMX lighting control. Additional configurations of RunONE include two channels of Category 5e cable that can be used for data drops in remote power and audio applications. Snakes with optional data can also be used for digital audio transmission while sending power to Front of House (FOH) for remote locations. Shielding around the power channels eliminates power noise from interrupting the audio/data signal, ensuring high-quality performance.

Joining the existing Professional Line of RunONE cables, the new Touring Line was designed with larger-gauge power conductors and an overall shield. The 12 AWG power conductors of the Touring Line provide a lower voltage drop for long distance runs, while the overall shield reduces outside noise often encountered during those longer runs.

Terminated with industry-standard connectors, RunONE cables offer the option of Edison, IEC and Neutrik® powerCON® connectors for the power channel; 3-pin XLR, 5-pin XLR (for DMX lighting), TRS and Neutrik® convertCON® connectors for audio channels; and RJ45 and Neutrik® etherCON® connectors for optional data channels. RunONE cables are available in pre-defined and custom configurations.

“The RunONE cables are a great solution for anyone looking to save time,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “Now the RunONE Touring Line also provides a neat solution where extended runs of cable are needed.”

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

General Cable Unveils Gepco® Brand Line of HydroBloc™ Water-Resistant Cables at the 2013 InfoComm Show

ORLANDO, FLORIDA, JUNE 12, 2013 — General Cable is pleased to unveil its new line of Gepco® Brand HydroBloc™ Water-Resistant Cables at the 2013 InfoComm Show (Booth #343) June 12-14, 2013. UL rated and in compliance with the TIA-455-82-B Water Penetration Test, the new line of HydroBloc cables is ideal for indoor/outdoor applications and for use in wet locations inside conduit. HydroBloc cables feature an advanced water-blocked construction, a sunlight- and moisture-resistant jacket and a ripcord for ease of stripping for audio/control versions.

The advanced water-block construction of HydroBloc cables starts with a two-ply water-blocking tape for superior protection. In contrast to one-ply tape in which water-blocking polymer is attached to one side of a fiber filament tape, the two-ply tape has the water-blocking polymer sandwiched between two fiber filament tapes, which allows for increased volume of the polymer. In addition, HydroBloc cables (with the exception of coax versions) utilize water-swellable fillers for added protection. This advanced construction results in greater swell heights to better fill any voids and prevent water from migrating down the cable and disrupting any electrical characteristics should there be a cut or slit in the jacket.

The HydroBloc line comes in a variety of cable types, in both shielded and unshielded versions, to cover an array of applications such as data or power control, multi-pair audio, general purpose audio, speaker, communications, power-limited circuits (fire alarm and tray cable), low-voltage industrial process control, CATV and HDTV.

“HydroBloc cables provide an excellent solution for indoor/outdoor applications,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “The two-ply water-blocking tape and water-swellable fillers provides superior water protection in all environments.”

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

General Cable Launches Gepco® Brand Line of ABS Shipboard Cables at the 2013 InfoComm Show

ORLANDO, FLORIDA, JUNE 12, 2013 — General Cable is pleased to launch its new line of Gepco® Brand ABS Shipboard Cables at the 2013 InfoComm Show (Booth #343) June 12-14, 2013. UL rated and American Bureau of Shipping (ABS) Type approved, the new line of Shipboard cables offers Gepco Brand quality and performance for audio, video and data applications in marine and offshore environments.

With all of the superior characteristics of traditional Gepco Brand cables but in the required low-smoke, zero halogen (LSZH) construction, the Gepco Brand ABS Shipboard cables are available a wide variety of cable types to cover an array of applications such as data or power control, microphone or line level balanced audio, general purpose audio, speaker, communications, digital audio, high-definition and standard-definition serial digital video, high-resolution analog video, broadband and baseband analog video, networking, wireless systems, VSAT, CCTV, security cameras and general distribution.

“Now yachts and cruise ships can benefit from the same excellence Gepco Brand has long been known for in the Broadcast and Professional AV markets,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “While designed for marine environments, Gepco Brand ABS Shipboard cables are manufactured with the same precision and offer the same performance and features as traditional Gepco Brand cables such as TactiCel™ Strong Cell Technology for coax cables and easy-strip foil shields for audio cables.”

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

General Cable Adds Graybar as a Distributor for Gepco® Brand Products

HIGHLAND HEIGHTS, KENTUCKY, APRIL 25, 2013 —General Cable Corporation (NYSE: BGC) is pleased to announce the addition of Graybar as a nationwide distributor of Gepco® Brand Commercial A/V cabling solutions. This expands General Cable’s relationship with Graybar, a leading distributor of electrical, communications and data networking products and provider of related supply chain management and logistics services.

“We are pleased to expand our portfolio to include Gepco Brand products,” said Garry Acker, Graybar Vice President, Product Management. “The innovation and quality of Gepco Brand products is expected to provide great value and solutions for our customers.”

“Graybar and General Cable have had a great relationship for many years,” said Chip Barrett, Product Manager, General Cable Communications Products. “Graybar’s vast network of locations combined with their extraordinary commitment to customer service and their distinct focus on providing the right solutions to their customers makes them the perfect fit as a supplier of Gepco Brand Products.”

Graybar, a Fortune 500 corporation and one of the largest employee-owned companies in North America, is a leader in the distribution of high quality electrical, communications and data networking products, and specializes in related supply chain management and logistics services. Through its network of more than 240 North American distribution facilities, it stocks and sells products from thousands of manufacturers, helping its customers power, network and secure their facilities with speed, intelligence and efficiency. For more information, visit www.graybar.com or call 1-800-GRAYBAR.

About Gepco® Brand
Gepco has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

About General Cable
General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Digg Syndication Del.icio.us Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: Cables, News |

General Cable Launches Gepco® Brand Line of HydroBloc™ Water-Resistant Cables

DES PLAINES, ILLINOIS, APRIL 4, 2013 — General Cable is pleased to launch its new line of Gepco® Brand HydroBloc™ Water-Resistant Cables. UL rated and in compliance with the TIA-455-82-B Water Penetration Test, the new line of HydroBloc cables is ideal for indoor/outdoor applications and for use in wet locations inside conduit. HydroBloc cables feature an advanced water-blocked construction, a sunlight- and moisture-resistant jacket and a ripcord for ease of stripping for audio/control versions.

The advanced water-block construction of HydroBloc cables starts with a two-ply water-blocking tape for superior protection. In contrast to one-ply tape in which water-blocking polymer is attached to one side of a fiber filament tape, the two-ply tape has the water-blocking polymer sandwiched between two fiber filament tapes, which allows for increased volume of the polymer. In addition, HydroBloc cables (with the exception of coax versions) utilize water-swellable fillers for added protection. This advanced construction results in greater swell heights to better fill any voids and prevent water from migrating down the cable and disrupting any electrical characteristics should there be a cut or slit in the jacket.

The HydroBloc line comes in a variety of cable types, in both shielded and unshielded versions, to cover an array of applications such as data or power control, multi-pair audio, general purpose audio, speaker, communications, power-limited circuits (fire alarm and tray cable), low-voltage industrial process control, CATV and HDTV.

“HydroBloc cables provide an excellent solution for indoor/outdoor applications,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “The two-ply water-blocking tape and water-swellable fillers provides superior water protection in all environments.”

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco® has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

Digg Syndication Del.icio.us Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: Cables, News |

Gepco® Brand Expanded DMX Lighting Solutions Featured at the 2013 NAMM Show

ANAHEIM, CALIFORNIA, JANUARY 24, 2013 — General Cable is pleased to offer its expanded line of Gepco® Brand DMX lighting solutions at the 2013 NAMM Show (Booth #6983) January 24-27, 2013.

Addressing industry demands and customer needs, Gepco has added DLC122 and DLC222 to its Gepco® Brand DLC Series DMX Lighting Control Cables. The new cables are designed with larger 22 AWG power conductors for use in extended distance runs without signal loss and feature an extremely durable and abrasion-resistant, yet flexible, polyurethane jacket. Ideal for heavy production use, rigging and touring conditions, DLC122 and DLC222 join DLC124 and DLC224 in the DLC Series.

The DLC series lighting control cable is a true DMX cable with an exceptionally durable and flexible construction. The series features 120 Ohm impedance, low capacitance, double (foil and braid) shield and color-coded conductors for easy identification. Unlike conventional cables that are not intended for data transmission, the DLC series offers reliable data transfer through its data-specific design. The single- and dual-pair designs of the DLC series accommodate multiple lighting manufacturers’ products, and the DLC222 and DLC224 meet the United States Institute for Theater Technology (USITT) standards for DMX512 cable specifications.

“Gepco and General Cable are happy to respond to customer needs,” said Joe Zajac, Sales and Applications Engineer for Gepco® Brand Products. “The new additions to the Gepco Brand DLC series will provide better performance for DMX lighting control in tough, heavy-production and touring conditions.”

Terminated with industry-standard connectors, the DLC series of cables are available in pre-defined and custom configurations with the option of 3-pin or 5-pin XLR connectors.

General Cable (NYSE:BGC), a Fortune 500 Company, is a global leader in the development, design, manufacture, marketing and distribution of copper, aluminum and fiber optic wire and cable products for the energy, industrial, and communications markets. In August 2009, Gepco International was acquired by General Cable. For more information about General Cable products, please contact your local sales representative or visit our Web site at www.gepco.com or www.generalcable.com.

Gepco International has been an industry-leading brand of studio, stage and broadcast AV cables and cable assemblies for 30 years. As a complete solutions-based supplier, Gepco also offers value-added service and distribution of connectors, cable management products, patch panels, and wire and cable accessories.

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

August 2014
M T W T F S S
« Jul    
 123
45678910
11121314151617
18192021222324
25262728293031

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication