A virtual press conference from Sound & Video Contractor

Archive of the AES Newslink Category

RF VENUE INTRODUCES RF OPTIX™

ASHLAND, MASSACHUSETTS – MARCH 2014: Wireless audio manufacturer RF Venue has released the RF Optix™ RF to fiber optic conversion system, a powerful new tool for mainstream wireless microphone users that expands the possibilities of antenna distribution and wireless audio design.

“RF Optix brings technology from the world of broadcast and IT into the reach of church, school, and theater wireless users,” says CEO Chris Regan. “Integrators, tour managers, and church technicians are now able to do things with fiber that would have been way out of budget, or downright impossible, with coaxial cable.”

The RF Optix system leverages the low cost, lossless characteristics of fiber optic cable over the expensive, fragile, lossy characteristics of coaxial cables. Fiber cable runs thousands of feet long are possible with negligible in-line attenuation, so antennas can be remoted in venues far away from racks or equipment rooms located elsewhere in the facility.

“One of the main constraints for distributed antenna systems for wireless audio is the cost and signal loss challenges of coax cables,” says Regan. “This is especially true for plenum installs, where plenum rated coax can exceed the cost of the entire audio system. With inexpensive plenum rated fiber cables, system designers can now rethink their equipment layouts without sacrificing the huge performance benefit of using a remote antenna system for their wireless system.”

The RF Optix system is offered as a single channel for connecting to one antenna or in a dual channel package for diversity antenna systems. The Install Package includes wall or rack mountable flanges and the Live Package includes a hard-shell carrying case. Both options include 10’ BNC to SMA adapter cables for connecting to antennas and wireless rack equipment; 9V screw-on power supplies are also provided. Available accessories include 100m single mode plenum fiber cables and 100m indoor/outdoor reinforced fiber cables. Custom fiber cable lengths are available.

ABOUT RF VENUE RF Venue is a new wireless audio company specializing in remote antennas, RF distribution equipment and RF signal management and monitoring systems for audio/video installations and live sound events.

http://www.rfvenue.com

Contact RF Venue at 800-795-0817 or email orders@RFvenue.com for further details.

DPA Microphones Allow Jure Tori To Move Freely On Stage

Slovenian accordionist Jure Tori is using DPA d:vote™ 4099 Instrument Microphones to bring extra energy and quality to the sound he is achieving on stage. The internationally acclaimed musician recently bought two d:vote microphones from DPA’s Slovenian distributor, Sonus, and is now using them for all of his live performances.

“When you’re playing an accordion, the whole body is involved,” Tori says. “Therefore I need microphones that enable me to move and express myself without limitations. With a DPA d:vote 4099 Instrument Microphone attached to my accordion, I am able to pick up the sound of the entire keyboard and really capture the sensitivity of my music.”

A unique and charismatic musician, Jure Tori has performed on stages all over the world, both as a solo artist and in collaboration with other musicians such as Austrian double bass player Ewald Oberleitner and guitarist Ariel Cubria. He also plays as part of the group Orlek and recently established the Tori Trio with Oberleitner and percussionist Ganesh Anandan. His reputation as an accordionist is now so well established that his songs are part of the curriculum programme for students of accordion and his compositions have been published by the Slovenian Music Information Center. His music has also been used to accompany animations by Dušan Kastelic (Bugbrain Institute), in movies by Metod Pevec and in various Slovenian and Austrian documentaries.

“My compositions express my personality, traumas and pleasures – sometimes in a funny way and sometimes in a sad way” he explains. “DPA microphones have brought real progress to my music, especially the work I am doing with the Tori Trio. With DPA, I have achieved more live musical energy, improved the quality of the sound and found it much easier to play my instrument.”

DPA’s d:vote 4099 Instrument Microphones are renowned for their audio quality and their versatility. Despite their tiny, discreet size and lightweight design, these clip mics are rugged, stable and perfectly suited to the rigors of touring and live performance. Intended for fast-paced settings, the mics can easily be unclipped and repositioned or moved to another instrument with only one hand. Additionally, the d:vote’s microphone mounting system is designed to be extremely gentle, never marring the finish of an instrument.

“On an accordion, the constant sound of the bass is very important and these microphones enable that sound to be properly picked up,” Tori adds. “They also make it much easier to record live concerts. I have managed to find a good solution for fixing and positioning the microphones on both sides of the instrument and as a result I am really enjoying the sound these microphones are delivering.”

-ends-

About DPA
DPA Microphones is the leading Danish Professional Audio manufacturer of high quality condenser microphone solutions for professional applications. DPA’s ultimate goal is to provide you – whether you’re in live sound, recording, theater or broadcast – with the absolute finest possible microphone solutions for your tasks. DPA takes no shortcuts in the design processes nor makes any compromises in manufacturing, which is all done at the DPA factory in Denmark. As a result, DPA’s products are globally praised for their exceptional clarity and transparency, unparalleled specifications, supreme reliability, and above all, pure, uncolored and undistorted sound.
For more information, please visit www.dpamicrophones.com

Yamaha Renowned Digital Console Legacy Continues With QL Series

BUENA PARK, Calif.—The Yamaha CL Series of digital consoles raised the bar in live digital mixing to an unprecedented level of refinement with evolved sound quality, operability, and functionality, while maintaining the traditional values that have made Yamaha digital mixers industry standards. Today, Yamaha Commercial Audio Systems, Inc. announces the worldwide launch of the QL Series inheriting CL features such as all-in-one mixing, processing, and routing capability for small to medium scale live tour sound, house of worship installations, corporate A/V, and speech applications.

As with the CL Series, the Yamaha QL Series includes circuitry and components that have been designed and selected with the utmost care, achieving outstanding audio purity from input to output. With a solid, sonic foundation it is possible to take full advantage of built-in premium internal processors such as legendary Yamaha VCM technology and the Portico 5033/5043 created in cooperation with Rupert Neve Designs to shape and create as required. For a wide range of speech applications, built-in Dan Dugan Sound Design automatic mixing provides optimum channel balance while allowing the mix engineer to concentrate fully on the overall sound.

“When Yamaha learned about my process, they thought it would be good for us to get together, states Dan Dugan. We collaborated on making a plug-in card that would go into Yamaha mixing boards, and it has been very successful. Then we decided to go one step further and build Dugan automatic mixing right into the new Yamaha QL. I am very excited about giving more Yamaha customers the opportunity to use my auto mixing.”

Significant features include port to port routing via built-in R Series input/outputs that can patch any input port to any output port so the QL console can function as a remote I/O device for any other QL or CL, touch and turn knob operation, and direct file compatibility between the new QL and CL Series Digital Consoles (no need for Console File Converter to exchange files). Yamaha QL consoles feature large touch-panel displays that make up a remarkably smooth, efficient control interface. In addition to ample analog input and output capacity, the QL Series features the same onboard Dante audio networking protocol that provides broad connectivity in CL consoles.

“The new QL Series brings the powerful features and quality of the CL Series to smaller applications along with additional enhancements not typically found in digital mixers in this price range,” states Marc Lopez, marketing manager, Yamaha Commercial Audio Systems, Inc. “These new enhancements will enable the engineer to use a sophisticated system that improves the overall operating experience.”

Remote control via an iPad with Yamaha StageMix as well as online/offline QL Editor Software for MAC and PC computers adds even more refinement to an already state-of-the-art operating environment. Yamaha QL 1 and QL5 consoles feature 16/32 built-in Mic/Line Analog Inputs, 18/34 faders, 8/16 built-in Analog Outputs, 32/64 + 8 Stereo input mixing channels capability, and 16 Mix + 8 Matrix (or 24 mix total) + Stereo + Mono Outputs. The built-in Dante interface (Daisy-chain or Redundant modes) provides a 64×64 matrix for the QL5 and 32×32 for the QL1. All consoles feature two MY Card Slots, 8-space Premium Rack, 8-space GEQ Rack, 8-space Effects Rack, and one license of Dante Virtual Soundcard is included.

Yamaha QL consoles are compatible with Nuendo Live (sold separately) and feature Nuendo Live Control, MIDI/GPI Control Ports, and two-track direct to USB and multi-track recording playback capabilities. The QL1 is also rack mountable (RK1 rack mount kit sold separately).

The Yamaha QL Series will be available in early April 2014 at an MSRP of $8,499 for the QL1 and $16,499 for the QL5.

For more information on the Yamaha QL Series, visit www.yamahaca.com.
To witness the new QL in action, visit Yamaha Commercial Audio Systems, Inc. at NAB 2014 in Las Vegas at booth #C2143.

-END-

About Yamaha Commercial Audio Systems, Inc.:
Yamaha Commercial Audio Systems, Inc. (YCAS) provides a full line of integrated professional audio products offering complete systems solutions for the broadcast, sound reinforcement/installed sound, touring, commercial recording, and post production markets. With the addition of NEXO to the product line, the company remains the official U.S. and Canadian distributor for all NEXO speaker models. YCAS offers comprehensive in-house and field product training for its customers, a dedicated dealer network, and 24/7 technical support.

Yamaha CL V2.0 Available in May

BUENA PARK, Calif.—Yamaha Commercial Audio Systems, Inc. has announced Version 2.0 of the Yamaha CL Series of digital audio consoles being introduced today at PL+S in Frankfurt. This major update includes enhancements for sound reinforcement applications as well as mix-minus capabilities for the broadcast market, broadening the range of applications where CL Series performance can be advantageous. Another significant enhancement in V2.0 is discovery and head amp control for the compact QL Series consoles, also launched today, that inherits CL Series features and performance. A QL console can function as both monitor mixer and I/O rack, for example, while a front-of-house CL console can remotely control the head amp gain of the QL console’s I/O.

New features in CL V2.0 include DCA Roll-Out: Channels assigned to DCA groups can be instantly called up to the console faders for enhanced operational flexibility; output DCA enables the Stereo/Mono bus masters, Mix bus masters, and Matrix bus masters to be assigned to DCA groups. Mix Minus, an important feature in broadcast applications is now provided; with one simple operation the signal from a particular channel can be removed from a specified bus.

“CL V2.0 not only adds features that are also included in new the QL Series launched today, but provides additional support for our core sound reinforcement customers with features that were only previously available on PM digital mixers,” states Marc Lopez, marketing manager, Yamaha Commercial Audio Systems, Inc. “Future plans include built-in Dugan automatic mixing similar to the new QL Series and additional support for broadcast applications in the CL Series. We will continue to keep a close eye on the market in order to provide features and performance that will maximize our customers’ investment in CL.”

With Read Only Scene Memory, it is now possible to create read-only scene memories. A new Daisy Chain Insert feature allows two devices to be inserted into one channel or bus for enhanced processing freedom. A GR Meter (dynamics meter) Option within the Channel Name Display will show the Dynamics 1 and Dynamics 2 gain reduction meters in the channel name display.

The CL V2.0 update will be available for download from the Yamaha Commercial Audio Systems web site in May and is free of charge. For more information on the Yamaha V2.0, visit www.yamahaca.com or stop by Yamaha Commercial Audio Systems at NAB 2014 in Las Vegas, booth #C2143.

-END-

About Yamaha Commercial Audio Systems, Inc.:
Yamaha Commercial Audio Systems, Inc. (YCAS) provides a full line of integrated professional audio products offering complete systems solutions for the broadcast, sound reinforcement/installed sound, touring, commercial recording, and post production markets. With the addition of NEXO to the product line, the company remains the official U.S. and Canadian distributor for all NEXO speaker models. YCAS offers comprehensive in-house and field product training for its customers, a dedicated dealer network, and 24/7 technical support.

ASHLY AUDIO APPOINTS NETHERLANDS-BASED MIKE VAN DER LOGT AS NEW SALES MANAGER FOR EUROPE, THE MIDDLE EAST, AND AFRICA

WEBSTER, NEW YORK – MARCH 2014: Spurred by growing demand in foreign markets that has prompted a complete sales reorganization, Ashly Audio has appointed industry veteran Mike van der Logt of 4M4You, to serve as its sales manager for Europe, the Middle East, and Africa (EMEA). Van der Logt has over 25 years of experience in the industry providing product and relationship advice to pro audio manufacturers. Based in the Netherlands, he is well-suited to serve EMEA customers. On behalf of Ashly, van der Logt will travel the region to strengthen and expand business with existing distributors and develop new relationships to sustain and build sales momentum.

“Mike has extensive product knowledge, creative ideas for product applications, and a solid history of sales success,” said Mark Wentling CEO at Ashly. “He has a proven ability to develop sales in both new and existing markets, strong analytical and planning skills, and excellent rapport with people and cultures across EMEA. Mike develops meaningful relationships with clients and turns them into solid partners.”

“Ashly Audio would also like to thank Peter Malech of PM Distribution Germany, for his many years of exemplary representation of Ashly in the EMEA. While Peter is stepping down from his Ashly duties, and assisting in this transition, PM Distribution will also continue on with EMEA representation for other manufacturers.”

“Ashly has been in business for forty years and has a serious legacy in the industry,” said van der Logt. “Ashly’s track record and famous reliability has earned them a lot of loyalty, and I’m excited to build on that kind of success. There is a lot to talk about in Ashly’s extensive product line, from the established workhorses – like the modular ne24.24M processor – to exciting new advances – like the nX-Series amplifiers, which pack tremendous power, higher channel counts, plus Ethernet control, Network Audio, and DSP into just a 2-rack space footprint.”

ABOUT ASHLY AUDIO Ashly Audio Inc. is recognized as a world leader in the design and manufacturing of high quality & high performance signal processing equipment and power amplification for use in the commercial sound contracting and professional audio markets. The 37-year old company is headquartered in Webster, New York U.S.A. www.ashly.com

(PHOTO CAPTION) (from left) Jon Paul Boucher – Ashly Audio COO; Mike van der Logt – Ashly Audio EMEA Sales Manager; Mark Wentling – Ashly Audio CEO.

Please stop by Ashly’s Prolight + Sound Booth 8.0D01 to meet Mike van der Logt and learn about Ashly’s ever growing product line.

ACCLAIMED MASTERING ENGINEER MATT COLTON RELIES ON ATC SCM150ASL PRO THREE-WAY ACTIVE REFERENCE MONITORS

WEST LONDON, U.K. – MARCH 2014: Matt Colton has been mastering albums for fifteen years. He continues to build on his growing reputation, mastering for the likes of Coldplay, James Blake, Gary Numan, and Metronomy, and his work recently earned him the title of “Mastering Engineer of the Year” from the Music Producers Guild. He has worked at several of London’s most esteemed mastering houses, including Porky’s Mastering, Optimum Mastering, AIR Studios, and Alchemy Mastering, the last of which he recently re-launched with original owners Barry Grint and Phil Kinrade. To maintain his edge, Colton installed a pair of ATC SCM150ASL PRO 3-way active loudspeakers in his critical listening room at the new Alchemy Mastering in West London.

For Colton, there’s more to mastering than simply having access to the latest and greatest ear-bending analog and digital signal processing technologies. “The things that are really important are the acoustics, speakers, amps, convertors, and power supplies, along with the wiring that connects them all together – everything that affects the sound in the room,” he said. “You cannot get around that. So I would rather have a great-sounding room and a workstation with a couple of plug-ins than every piece of hardware ever made and a poor-sounding room, because, no matter how much you say you understand the room, we all react to what’s coming out of the speakers and make our judgments based on how it sounds in the room. If the room is too bassy then the recording is going to be bass light, even if we know the room is too bassy.”

Fundamental to Colton’s current way of working is a pair of ATC SCM150ASL PRO 3-way active loudspeakers. “Having worked at AIR on a really lovely pair of hi-fi speakers, I felt I wanted to go back to studio monitoring and have something that maybe sounded a bit less polished in terms of the actual sound that’s coming out of the speaker,” he said. “So I’m working on a pair of SCM150ASL PROs. I’d previously worked on a pair of SCM200s many years ago, which I loved.”

An unconventional demonstration convinced Colton that the SCM150ASL PRO patently met his critical listening criteria: “I did a lecture at Westminster University in Harrow to over one-hundred people in a really big lecture hall with a massive ceiling height of fifty feet or so. Ben Lilly of ATC brought along a pair of SCM150s and I played some James Blake records with really low sub-bass – down at around 35Hz – and they just sounded glorious. It was a wonderful experience to hear those records played in that room only on a pair of speakers. So, on that basis, I’ve got the 150s in my mastering room – sadly, not quite as big as that lecture hall!”

With well-honed listening skills, Colton is perfectly positioned to provide honest insight into the SCM150ASL PRO in action at Alchemy Mastering. “They’re a direct and honest pair of speakers,” he said. “If the mix sounds good, then it sounds good here; if it doesn’t, then it doesn’t. There’s no flattery on the part of the speakers, though they’re wonderful to listen to when you get it right. I’ve really enjoying working on them.”

ABOUT TRANSAUDIO GROUP TransAudio Group, founded by industry veteran Brad Lunde, has quickly become the premier U.S. importer/distributor and/or U.S. sales and marketing representative for high-end audio. Success hinges on TransAudio providing dealers and end users with a higher standard of product expertise and support far beyond the norm. www.transaudiogroup.com

DANLEY SOUND LABS SEEKS INTERNATIONAL DEALERS AND DISTRIBUTORS AT PRO LIGHT AND SOUND

GAINESVILLE, GEORGIA – MARCH 2014: Danley Sound Labs, manufacturer of innovative loudspeakers and subwoofers, will be at booth 8.0N60 (Hall 8.0, Booth N60) at Pro Light & Sound in Frankfurt, Germany March 12 –15, 2014. As Danley approaches its tenth year in business, its solid foundation in the house of worship and theater markets has expanded exponentially into the arena and stadium markets with the introduction of the Danley Genesis and Jericho horns, which deliver line array coverage from point-source designs. To support and sustain that growth, Danley is seeking international dealers and distributors in several key locations to join its team. Interested parties should either contact Jonathan “J.P.” Parker, Director of Sales, and Chad Edwardson, Applications Engineer, or meet them at Pro Light & Sound.

“Although we have many areas of the world covered, there are still numerous holes in Danley’s global dealer and distribution network that need to be filled,” said Parker. “We’re looking forward to meeting with candidates at Pro Light & Sound.” In addition to a collection of its established models, Danley will have its new OS 80 weatherproof loudspeaker and its new SBH-10 Skinny Big Horn at the show. Danley designs have made a big splash in the American and European sports arena market, with Genesis Horn and Jericho horn installations at football stadiums (Lambeau Field and Ralph Wilson Stadium), college American football stadiums (Louisiana State University, Arizona University, Brigham Young University, Michigan State University, and Northwestern University, among many others), and as well as indoor sports arenas.

To set up an appointment contact: J.P. Parker (jp@danleysoundlabs.com) or Chad Edwardson (chad@danleysoundlabs.com)

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology.

www.danleysoundlabs.com

48-CHANNEL ANALOG API VISION CONSOLE PLAYS A PART IN FILM

MEMPHIS, TENNESSEE: A 48-channel API Vision console has had a large impact on the fortunes of Ward Archer and his enterprise, Music+Arts Studio. Twenty-five years ago, Archer closed a chapter of his life at the helm of an ad agency to found Archer Records. Six years later, he opened the David Cherry/George Augspurger-designed studio to cater to the label’s artists and has not looked back since.

Music+Arts Studio launched with a 48-channel, discrete, all-analog, surround-sound API Vision console, and prominent members of Memphis’ indie film scene became regular clients over the following years. Like a locomotive building momentum, Music+Arts Studio is currently attracting more and more film work from an expanding geographical base. The ratio of film-related to pure music projects is creeping up on 50:50 thanks, in part, to the API Vision.

“These days, I’m comfortable saying that we have a lot of experience with sound for picture, but that’s owing to some clients that rolled the dice with us in the beginning,” said Archer. “One of our earliest and greatest successes was The Gospel According to Jazz Chapter III, which was recorded live at Reid Temple in Maryland. We took those tracks – which sounded amazing from the moment we pulled them up on the API Vision – and mixed them for stereo and 5.1 [which the Vision is designed to do simultaneously]. The Vision has a transparency and an airiness on the top end that just sounds gorgeous.” The track “It’s What I Do” won a Grammy for Best Gospel Song.

In addition to the API Vision and a killer live room, Music+Arts Studio has catered to its client base by adding an eight-foot Stewart Filmscreen and high-definition projector for film mixing. “It’s a nice, cinematic experience for the director or music supervisor,” said Archer. “We’ll even crank up the [5.1 PMC] monitoring system a bit for the full effect.” The scope of Music+Arts Studio’s film work ranges tremendously, from ADR to scoring to mixing. For example, all of the score recording for the Matthew McConaughey-led drama, Mud, were recorded using the warm analog sound that the API Vision’s circuitry provided. Other projects include the indie film, Cigarette Girl, and mini-series, Headshop.

Despite the film industry windfall, Music+Arts Studio still enjoys tackling strictly-music projects for artists on the Archer Records roster. Recently, Amy LaVere completed Stranger Me, her fourth studio album on Archer Records. Studio manager and engineer Daniel Lynn assisted the project’s producer and engineer Craig Silvey, who had just finished mixing Arcade Fire’s Grammy-winning release, The Suburbs. “Silvey loved the Vision,” said Lynn. “I remember that there was one point during the mixing where we wanted to do some complicated bussing, and it wasn’t immediately apparent how to do it. I called API and got someone on the phone right away. Craig was impressed that we had that kind of rapport!”

ABOUT API (AUTOMATED PROCESSES, INC.) Established more than 40 years ago, Automated Processes, Inc. is the leader in analog recording gear with the Vision, Legacy Series and 1608 recording consoles, as well as its classic line of modular signal processing equipment.

www.apiaudio.com

(PHOTO CAPTION) Music+Arts Studio Manager/Engineer Daniel Lynn (right) pictured with Colin Hay (Men at Work) during a recent session.

DANLEY JERICHO HORNS FILL 2200-SEAT FIRST REDEEMER CHURCH WITH STUDIO-QUALITY SOUND

CUMMING, GEORGIA: For a long time, First Redeemer Church in Cumming, Georgia didn’t have a purpose-built sound reinforcement system for its stunning 2,200-seat sanctuary. The contemporary band that rocked the morning service, as well as the orchestra and two-hundred-plus voice choir that supported the traditional service, played through the repurposed remnants of a sound reinforcement system that had once serviced their converted warehouse where the church first started. Years of band-aids and add-ons averted disaster, but the room was so unevenly covered that a foot in either direction was often significantly different, with obvious phasing in the travel. Now, a pair of Danley Sound Labs’ most powerful point-source boxes, Danley Jericho J1-94s, deliver stunning stereo imaging with abundant low-end support from a beefy Danley BC-415 subwoofer flown in the center of the room. “First Redeemer now has the best sounding sanctuary in the world,” averred Scott Oliver, owner of Centerline Audio Visual of Hendersonville, Tennessee. “I would put it up against any other system, at any price!”

Oliver designed and installed the system, with custom rigging and fly-ware by Diekhoff Company (Nashville, Tennessee). “My philosophy is always to use as few speakers as possible,” said Oliver. “There’s less destructive interference and fewer alignment issues. Instead of using more speakers for a larger room, I prefer to use larger speakers. A lot of people think I’m nuts for designing Danley Jericho Horns into this, but the results say otherwise. The Jericho offers stunning detail and clarity. It’s very accurate – like a giant studio monitor. With two of them, the stereo imaging is vivid, and it is easy to pick out each and every instrument on stage. Even sitting in the balcony, you can hear the snares rattling and different hi-hat velocities. And even though it’s been said a billion times, it’s still true: Danley’s pattern control is unbelievable. The coverage at First Redeemer is remarkably even.”

In addition to the two Danley J1-94 loudspeakers and the BC-415 subwoofer, a pair of Danley SH-69s provide down-fill for the first few rows and a pair of Danley SH-46s provide side-fill. An existing Digidesign Venue console is still in use and feeds a pair of Danley DSLP-48 processors. Three new Danley EDA 12k and four new EDA 4.8k amplifiers power the system “We did a shoot-out with a number of high-end commercial amplifier manufacturers, and the Danleys had the most consistent measured RMS power level,” said Oliver. “Moreover, I like that they are just straightforward amplifiers – no crazy bells and whistles. The whole system embodies the same sort of simplicity – just a couple of processors, 52,000 watts, a handful of (large) loudspeakers, and one massive subwoofer!”

First Redeemer had originally considered purchasing a line array system from another super high-end loudspeaker manufacturer. “We did an entire design and brought in a system to test,” explained Jeff Baggett, First Redeemer’s audio engineer and a Nashville mastering engineer. “It sounded great, and I was skeptical that Danley would be able to touch it. Scott [Oliver] brought over a pair of the Danley Jericho Horns and powered them up. Immediately it was game over. The Danleys ate the other system for lunch. They were tremendously even and had no finger lobes at all. We even matched the EQ curve of the other system to try and make it a fair fight, but the Danleys still killed it. Now that the system is properly installed and voiced for the room, it’s even better. I love it. It’s the kind of sound that makes you want to just bring in some music and listen. The reproduction is so accurate that I could easily master an album on the system. It’s that good. And the subs are just incredible.”

“The very first song we pulled up had no EQ or processing, but already the new Danley system sounded 3,000-times better than the old system that they had been trying to perfect for sixteen years,” said Oliver. “By the time we where on song three, it sounded like a record. The mix was expansive and rich. When we went to the traditional service, Baggett was mixing sixty channels of audio, and anyone in the congregation could easily distinguish each one of those instruments. The church was also impressed by the price tag for this world-class sound system. It was about one quarter the price of the original line array that they had considered!”

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology. www.danleysoundlabs.com

Prism Sound Brings Mic To Monitor Back To The USA

How do the pros do it? What makes great gear great? How is that hit sound achieved? What does it take to become a successful and in demand audio engineer?

These are just some of the questions that Prism Sound will set out to answer when it takes its hugely popular Mic to Monitor series of free seminars and workshops to the USA for a five date tour.

Targeted at music production students, hobbyists and professionals, Mic to Monitor aims to dispel the many myths surrounding the recording process. In conjunction with SADiE and PMC, Prism Sound will be hosting events at SAE Atlanta (March 19th); Full Sail, Orlando (March 21st); the Winter Music Conference, Miami (two days on March 24th and 25th) and the University of Miami (March 26th).

Each seminar features presentations from recording professionals who will answer audience questions on recording techniques. There will also be the opportunity to demo equipment and win recording equipment. The Mic to Monitor event in Orlando will also be webcast live for those who want to be part of the experience but can’t get along in person. To register, please contact sales@prismsound.com

Chris Allen, Prism Sound’s SalesExecutive and Support Engineer, says: “Our Mic to Monitor tours are always well received because they give those attending the opportunity to learn tips, tricks and technical know-how directly from top producers and engineers. Our guest speakers are always willing to share their knowledge and to back up their examples with original material from their own studios and projects.”

Guest speakers for Mic to Monitor USA 2014 include Edward J “UK” Nixon of the Grammy Award winning J.U.S.T.I.C.E. League, and multi-Grammy Award winning producer Dwayne ‘Supa Dups’ Chin-Quee.

Edward J “UK” Nixon, who presents the seminars in Atlanta and Orlando, will give an insight into his unique story No Secrets, the rise of his career from early beginnings in the idyllic Lake District in the English countryside to becoming one of the most globally respected engineers of today. Edward will also demonstrate his approach to the workflow, mixing style and processes which earned him his title as Chief Engineer of the production super-group, The J.U.S.T.I.C.E. League (Sir Paul McCartney, Nas, Mary J. Blige, Rick Ross & Drake).

Multi-Grammy award winning Producer and DJ Dwayne ‘Supa Dups’ Chin-Quee, who presents the Miami sessions, will share his knowledge under the heading That Perfect Mix. His production experience is legendary and has resulted in over 25 million record sales to date for his work with Eminem, Drake, Bruno Mars, John Legend, Mary J Blige, Snoop Dogg (aka Snoop Lion), Akon, Rihanna and many more.

As well as guest presenters, Prism Sound’s Mic To Monitor sessions will also feature talks from top British pro audio equipment manufacturers Prism Sound, PMC and SADiE. These will cover hardware design and optimizing your studio setup, converter design and clocking, and speakers and acoustics. Professional mastering will also be discussed, with the chance to have questions answered first hand from leading designers and makers of high-end professional audio products.

Places on Prism Sound’s Mic To Monitor Tour USA are limited and are allocated on a first come, first served basis. Anyone registering and attending will have an opportunity to win prizes from Prism Sound, PMC and SADiE.

-ends-

To register your interest, please visit the relevant link:

Mic to Monitor USA Tour 2014 ATLANTA

http://www.eventbrite.com/e/mic-to-monitor-usa-tour-2014-atlanta-registration-10571225821?aff=PR

Mic to Monitor USA Tour 2014 UNIVERSITY OF MIAMI

http://www.eventbrite.com/e/mic-to-monitor-usa-tour-2014-university-of-miami-registration-10572190707?aff=PR

Mic to Monitor USA Tour 2014 WMC MIAMI

http://www.eventbrite.com/e/mic-to-monitor-usa-tour-2014-wmc-miami-registration-10572222803?aff=PR

Mic to Monitor USA Tour 2014 ORLANDO

http://www.eventbrite.com/e/mic-to-monitor-usa-tour-2014-orlando-registration-10572172653?aff=PR

About Prism Sound
Founded in 1987, Prism Sound manufacture high-quality professional digital audio equipment for the International broadcast, film, music production, manufacturing and telecommunications sectors. The company’s product range includes the Prism ADA-8XR precision 8-channel converter unit, which is regularly used for music and film soundtrack projects by clients such as EMI Abbey Road, BBC, Sony, Lucasfilm and Walt Disney. Prism Sound also manufactures a range of audio test and measurement products, including the de facto standard DSA-1 handheld digital audio generator/analyser and the dScope Series III audio analyser system.

For more information: www.prismsound.com

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

September 2014
M T W T F S S
« Aug    
1234567
891011121314
15161718192021
22232425262728
2930  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication