Costa Mesa, CA (December 5, 2012) – QSC Audio Products is proud to announce the launch of the AcousticPerformance™ line of professional, two-way, full-range loudspeakers, ideal for a variety of installed sound reinforcement applications which require higher SPL and a stylish enclosure. All models feature a 3-inch voice coil, high power-capacity compression driver combined with high-output woofers to deliver exceptional full bandwidth reproduction.

“In keeping with QSC’s loudspeaker design philosophy, all AcousticPerformance loudspeakers feature Directivity Matched Transition™ (DMT) which matches the compression driver to the natural coverage angle of the woofer in the cross-over region�, states Phil Sanchez, QSC Loudspeaker Product Manager. “When combined with their axisymmetric waveguides, AcousticPerformance loudspeakers deliver a flat power response with smooth and accurate sonic reproduction and remarkably consistent coverage both on and off-axis.�

AcousticPerformance models may be used in passive (full-range) mode to minimize amplifier channel count or bi-amp mode for greater control and performance. To further enhance performance, bi-amp and full-range tunings using QSC Intrinsic Correction techniques are available for Q-Sysâ„¢ and future QSC products.

All models feature M10 mounting points for deployment via eye-bolts as well as mount points for an optional yoke bracket. The AP-5122m multi-purpose enclosure features a 40-degree angle, making it ideal for floor monitor use, and a pole cup for deployment on a loudspeaker stand. The enclosure and terminal input cup on the AP-5122m have been designed to facilitate the cable runs for a clean appearance on stage.

Presenting a clean, unobtrusive look, AcousticPerformance grilles are unadorned, eliminating the need to cover-up logo treatments, which can be difficult to hide or remove. The grille is also lined with acoustically transparent backing, adding to the enclosure’s professional appearance.

AP-5102/5122/5152 models are available in black (RAL 9011) and white (RAL 9010) finishes. AP-5122m is available in black only. To minimize impact and disposal fees at the job site, all AcousticPerformance loudspeakers are packaged in environmentally friendly, recyclable cartons.

Key Features of the AcousticPerformance Line:

•DMT™ (Directivity Matched Transition) ensures smooth, coherent power response across the listening plane
•3� diaphragm compression delivers a clean and powerful high frequency response
•M10 fittings and yoke mount fittings offer flexible deployment options for a variety of applications
•Clean industrial design with unadorned grilles complement most decors and settings
•NL4 Speakon™ connector and covered barrier strip terminals*
•Bi-Amp / Passive Switchable
•Constructed from 15-ply Baltic birch plywood
•16-Gauge powder coated steel grilles
•Available in black (RAL 9011) and white (RAL 9010)*
•Complete EASE, CAD & BIM information available online
* Except for 5122m

For more information, visit the AcousticPerformance product page at http://qsc.com/products/speakers/ap/

About QSC Audio
QSC Audio Products, LLC is a leading manufacturer of power amplifiers, loudspeakers, digital signal processors, digital sound transport, and network audio for professional audio systems worldwide. qsc.com

Valencia, California (September 25, 2012) – Leading audio production company, ATK Audiotek, is proud to welcome Michael MacDonald to take over the duties as President and leadership of the company’s business development, sales and marketing programs, coincident with the retirement of outgoing President Michael Stahl.

MacDonald joins ATK Audiotek with over three decades of experience in the professional audio industry, most recently having served for five years as Vice President of Sales and Marketing at HARMAN Professional. Prior to HARMAN, Michael operated a successful consulting business at Pilot Business Strategies, where he worked with over 30 professional audio clients and trade organizations on product and program development, business planning and marketing and sales, where he built strong relationships with a diverse array of industry stakeholders. MacDonald has held senior roles at other professional audio manufacturers, including as President of JBL Professional and 10-years in various executive positions with Yamaha International.

Michael MacDonald began his career in the audio business in the production industry working as lead audio engineer on a host of major tours and projects including Olympics Opening and Closing Ceremonies, the GRAMMY® Awards and Presidential debates.

“Having Michael MacDonald join the company is a natural extension of the relationships we have enjoyed for over 30 years,� commented Mikael Stewart, Partner and Vice President of Special Events, ATK Audiotek. “We’re very pleased to welcome him onboard and look forward to his ideas and his energy just as we are appreciative of Mike Stahl’s massive contribution to ATK since its foundation!�

Scott Harmala, Partner, CTO and Vice President of Engineering, ATK Audiotek, concurs “Michael not only brings decades of experience and industry contacts but a proven, high energy, creative approach to building new business. We share a considerable history together but also a strong vision for the future potential of the production industry and of ATK Audiotek!�

Michael MacDonald noted, “I am really excited to be moving to ATK Audiotek for the next phase of my career,� add Michael MacDonald on his new role. “ATK Audiotek is a great company that has been a pioneer in the live event industry and has built a solid business by focusing on superb customer service. I am really flattered that Mikael and Scott have given me the chance to join the team as an ATK partner and I also appreciate the support Michael Stahl has provided to make this possible.�

About ATK Audiotek
Founded in 1983, ATK Audiotek is the foremost sound reinforcement provider in the professional audio industry. ATK Audiotek provides unparalleled quality and reliable service to all of its clients. ATK Audiotek’s client roster includes hundreds of television productions, special events, industrial conventions, permanent installations and concert tours. ATK Audiotek has received many awards including four nominations and two wins of the prestigious TEC Award for outstanding technical achievement. For more information please visit http://www.atkcorp.com/about.html

NEW YORK, NEW YORK – SEPTEMBER 2012: This past weekend, at IMSTA Festa, Metric Halo announced the release of the Metric Halo Production Bundle for Pro Tools 10 for Windows, as well as Macintosh Audio Units. The software will be available 9/25/12 and consists of seven plug-ins compatible with AAX Native and AAX DSP Pro Tools systems and any Macintosh DAW that supports Audio Units: ChannelStrip 3, Character, HaloVerb, Multiband Dynamics, Multiband Expander, Precision DeEsser, and TransientControl.

This bundle provides all the tools necessary to sculpt a mix. Four of the plug-ins contain audio analysis tools from Metric Halo’s SpectraFoo software, giving the user visual feedback of the plug-in’s processing. “We’re excited to release the Production Bundle for Pro Tools on Windows,� said Allen Rowand of Metric Halo. “The introduction of the AAX plug-in format has made it possible for us to offer our software on Windows for the first time. We’re also thrilled to make the Production Bundle available to all of our longtime Macintosh users. The great thing about the Production Bundle is that one iLok license works cross-host and cross-platform – so if you prefer to edit audio in Pro Tools but compose in Logic, you only need one license. Or if you work in Pro Tools in Windows at home and Mac in the studio, you’re covered as well.�

The MSRP for the bundle is $699 USD, with individual plug-ins priced at $199 USD each. Upgrades from ChannelStrip 2 to ChannelStrip 3 are available for $49, and upgrades from ChannelStrip 2 to the Production Bundle cost $549. Owners of Metric Halo’s +DSP software may purchase the Production Bundle for $549, and may purchase the Bundle for $399 if they own licenses for both +DSP and ChannelStrip 2. Customers who have purchased ChannelStrip 2 Native since October 1, 2011 are eligible for a free upgrade to ChannelStrip 3.

In order to celebrate the release of the Production Bundle, Metric Halo is offering special pricing from 9/25/12 to 10/25/12; the Production Bundle and individual plug-ins are 25% off. See http://mhlabs.com for more information.

Promotional pricing is available through Metric Halo dealers, as well as Metric Halo’s direct sales site, and may only be combined with customer loyalty discounts. AAX plug-ins require Pro Tools 10 or later running on Mac OS X or Windows, and Audio Units require Mac OS X and Audio Unit hosts. The Production Bundle and individual plug-ins require an iLok for authorization.

ABOUT METRIC HALO Now based in the sunny city of Safety Harbor, Florida, Metric Halo provides the world with high-resolution metering, analysis, recording and processing solutions with award-winning software and future-proof hardware. www.mhlabs.com

KanexPro the leading A/V Connectivity solutions provider is proud to introduce the Mini Audio Amplifier is a quarter-rack width digital amplifier (Class D) with equalizer control and Mic mixer. It’s a simple yet powerful device delivering 2×20 Watts@4Ohm default output with built-in volume/ bass feature. It also supports dual mono-output with 2 stereo audio selectable inputs. The Microphone mixer includes independent volume control with balance switching. Supports balanced/ unbalanced signals.

This Mini Audio Amplifier is mainly used during lectures, house of worship centers and various musical events where mic mixing together with equalizing audio is critical.

Features:

• Fast switching audio amplifier
• 2×20 Watt@4Ohm as the default amplifier output
• Bridge connection supported by switching the amplifier to be 1x40Watt@8Ohm
• Supports Dual-mono output
• Built-in Microphone mixer (separately controllable)
• Line audio output, with volume controllable.
• MIC input supports 48V phantom power
• MIC port with balanced switching suppress
• Supports balanced/ unbalanced signals
• Supports Ducking power technology
• Ultra low inrush current
• Two stereo audio inputs, switchable by button, remote or RS232.
• Volume/Bass/Treble controllable by buttons or RS232
• Optional control by IR remote
• Convection cooled, antistatic case design
• LED indicator, for power and operating status
• IR remote (optional) not included
• Internal Universal power adaptable (100-240 volt AC, 50/60Hz)

About KanexProâ„¢

Leveraging our core strength in professional A/V products, KanexPro carries a complete selection of A/V connectivity needs. When planning digital installations you will find that we carry a broad line of A/V connectivity products enabling you to broadcast, extend, split, or multiply HD signal transmissions; simply and cost-effectively.

KanexPro is a registered trademark. All other trademarks and registered trademarks mentioned herein are the property of their respective owners.

SÃO PAULO, BRAZIL – JUNE 2012: With a burgeoning music scene steeped in traditional Samba and increasing interest in rock, Brazilian pop and local folk music, the Brazilian recording industry took a giant leap forward with the installation of the first API 1608 console in Brazil. Producer and recording/mixing engineer Zeca Leme recently installed a new 16-channel 1608 alongside API 500s, 525s, 550Bs and a 512c already in place at the newly opened Behind the Glass Recording Studio.

Leme first encountered API while attending AES in New York. He returned to Brazil for a position at Loudness Sound Studio as a live DVD recording engineer. In 2007 Leme moved on to NaCena Studios where he worked with artists such as Ney Matogrosso, Earth Wind & Fire, Kanye West and Oficina G3. He encountered API again working with legendary engineer Roy Cicala at 5A more

New Version of Industrywide Favorite for Time Code Solutions

Brainstorm Electronics, the world leader in time code and clocking solutions, is introducing for the first time at InfoComm 2012 the new SR-112 Time Code Distripalyzer.  This new model of the industry favorite is designed for large A/V systems, theme park attractions, cruise ship entertainment, synchronized water fountains, and remote recording trucks, among many other applications.   http://www.brainstormtime.com

Brainstorm’s new SR-112 Time Code Distripalyzer, replaces the industry standard SR-15+. It is a time code reader, distributor, reshaper, analyzer and generator all in a 1U rack mount device. The analyzer indicates format, frame rate, errors and video phase, and outputs a comprehensive report; the 1×12 distributor reshapes the signal; the optional generator repairs drop-outs and generates new code. All SMPTE and EBU SD/HD rates are supported. Ethernet is included for reporting and to set parameters and update firmware.

About Brainstorm
Brainstorm products deliver complete solutions for all sync requirements in the post- production, recording and broadcast environments. Designed for operations ranging from audio recording studios to large post-production houses and major broadcast facilities or remotes, Brainstorm offers the most comprehensive package for all clocking needs, providing versatility in the widest range of applications.

Experience the new Brainstorm SR-112 at InfoComm in Las Vegas,
June 13 – 15, Booth # C11349

For more info, visit: http://www.brainstormtime.com
or phone 323.845.1171

 

 

WINTER PARK, FLORIDA – MAY 2012: Storch Entertainment Systems was recently contacted by Phil Kean Designs, the builder of a luxury home, in Winter Park, Florida. The homeowner, a passionate music lover, was eager to possess a world-class media room with sound reproduction so faithful it would rival even the great control rooms of the world. Michael Storch, owner of Storch Entertainment Systems and kindred media-phile, oversaw the room’s design, calling in experts such as Michael Chafee to help make the room absolutely perfect. In addition to superlative acoustical design and top-of-the-line components, the room benefitted, in Storch’s words, “by an order of magnitude” from Chafee’s careful system calibration using a Symetrix Jupiter 8 digital signal processor that resides between the Denon surround-sound processor and the self-powered Genelec loudspeakers.

“The idea was to recreate the listening environment that the mix engineer of the more

KanexPro (Booth # C7247 at InfoComm 2012), the leading A/V Connectivity solutions provider is proud to introduce ProBar Series of High Speed HDMI®. Available in combinations of 1×2, 1×4 and 1×8 I/O’s. Engineered for industry professionals wanting to distribute high-resolution video on eight HDMI displays. With no downtime or signal degradation, this HD splitter enables stunning resolutions up to 4K x 2K, 3D support and bandwidth up to 10.2 Gbps.

Fully compliant with EDID and HDCP management the ProBar HDMI splitters can be integrated anywhere from digital signage to healthcare AV where high-resolution signals are mission critical for today’s applications.

About KanexProâ„¢

Leveraging our core strength in professional A/V products, KanexPro carries a complete selection of A/V connectivity needs. When planning digital installations you will find that we carry a broad line of A/V connectivity products enabling you to broadcast, extend, split, or multiply HD signal transmissions; simply and cost-effectively.

KanexPro is a registered trademark. All other trademarks and registered trademarks mentioned herein are the property of their respective owners.

Imerge, the internationally acclaimed provider of multi-room audio and video entertainment solutions, has launched a new High Definition Mini Client playback device that is ideally suited to installations where space is at a premium.

This powerful, compact unit works in conjunction with the new Imerge MS1-3D range of media servers to offer local playback of DVDs as well as music and 2D HD movies, including full HD audio.

Weighing just 450g and smaller than two DVD cases, the Imerge Mini Client is supplied with VESA 75/100 mounts so that it can be mounted or hidden behind a TV screen without being obtrusive or detracting from the room décor. On a Super yacht with many cabins, for example, customers can archive and store all of their music and movies on the main MS1-3D server, yet still provide playback to each zone individually and with no compromise in sound or picture quality.

Each Mini Client installed connects to the main MS1-3D server, which can be housed in an equipment room, using GB Ethernet, thus doing away with costly and unsightly wiring. As well as delivering 2D HD playback via the Mini Client, the main server can also store and play DVDs as well as 2D and 3D Blu-ray movies in full 1080p High Definition quality to larger screens and movie theatres. Should other additional 3D zones be required, more MS1-3D clients can be added into the system, thus also providing more local archiving.

Graham Boswell, Sales Director for Prism Sound, which now owns the Imerge brand, says: “The Mini Client, which was shown as a prototype at ISE 2012, was developed in direct response to installers’ requests for a playback unit that was small enough to be unobtrusive, yet powerful enough to deliver the quality that Imerge customers expect. With very low power consumption and being four times smaller than its nearest competitor, the Mini Client is ideal for situations where space is tight as customers can house the MS1-3D server elsewhere and simply tap into its power and archiving capabilities via Ethernet.�

The introduction of the MS1-3D and Mini Client combination consolidates Imerge’s pioneering work in audio and media servers by offering the market a 4th generation entertainment solution that cements its position as a market leader.

The MS1-3D is a complete media server combining the highest quality playback of music and movies with an extensive range of additional benefits, making it the most compelling high-end media server on the market. The unit includes a multiple language user interface for international customers and an iPhone controller app that puts the user in complete control of the system.

The new MS1-3D integrates fully with the companion XiVaSafe high-reliability redundant disk storage array, which ensures that customers don’t lose media in the unlikely event of a disk failure. The network storage can also be used to store user documents and features RAID-6 technology meaning that up to two disk drives can fail without losing content compared to just the one in competing products – an important consideration when systems are remotely located. Imerge-branded server products are complemented by the XIVA on-line music store and a range of hardware and software accessories.

For more information about the Imerge MS1-3D and Mini Client, please visit www.imerge.co.uk

-ends-

Imerge
Part of what is popularly known as the “Cambridge Phenomenonâ€�, Imerge is well-qualified to be the leader in its field. A spin-off from Cambridge-based technology consultancy “Scientific Genericsâ€�, it developed the world’s first hard drive-based audio server, the SoundServer, back in 1990s. In 2007 Imerge launched a multi-terabyte, 1080p-capable music/movies multi-room server which was hailed for setting new standards in usability and reliability, as well as delivering the very highest standards of audio and video performance. In 2008 Imerge launched the state of the art 1080p-capable MP1000 MediaPlayer which unlocked a breathtaking range of new installation possibilities. In 2008, Imerge changed the rules by introducing the world’s most advanced media server, the MS1, and its associated enterprise grade storage solution, the XiVASafe. Redefining the way we interact with our media, the MS1 has evolved into the MS1-HD, incorporating Blu-ray support, and the revolutionary new XiVA music store.

For more information please visit www.imerge.co.uk or www.xiva.com

SAFETY HARBOR, FLORIDA – FEBRUARY 2012: Metric Halo is pleased to officially certify two Thunderbolt adapters for use with their line of FireWire based audio interfaces. According to Allen Rowand of Metric Halo, “We’ve tested the Thunderbolt-to-FireWire adapter in the Apple® 27-inch Thunderbolt Display and the Sonnet Technologiesâ„¢ Echo 34 adapter combined with their FireWire 800 Pro ExpressCard – both systems provide performance identical to native FireWire ports. Since the display has a Thunderbolt pass-through it’s possible to use both adapters at the same time, allowing the user to create two separate FireWire busses. With two busses the user can connect up to six of our interfaces, or use one for up to three interfaces and the other for hard drives.”

Rowand said the company looks forward to incorporating Thunderbolt into their products. “We’re in discussions with Intel to gain access to Thunderbolt more