A virtual press conference from Sound & Video Contractor

Archive of the GV Expo Newslink Category

New Jersey Township Chooses Yamaha CIS System

BUENA PARK, Calif.—The Township of Evesham, New Jersey courthouse is a typical municipal courtroom. It doubles as a non-jury courtroom, as well as a council meeting room and a township meeting room. Between the court and various town meetings, there can be up to 16 microphones on at any given time. The microphones need to be fed to the live speakers and for multi-track recording purposes.

ACIR Professional of Mays Landing, New Jersey was chosen to replace the live portion of the Township’s audio system in the hope of obtaining a cleaner, clearer sound. “In addition to obtaining a better quality sound, the customer still wanted to be able to send audio via multi-track to record,” states Vice President of Sales, Bobby Harper. “Having just demoed the new Yamaha CIS (Commercial Installation Solutions) Series products, the design became obvious.”

ACIR Pro chose a Yamaha MTX5-D processor with the EiX8-8 channel extender in order to accommodate the 16 inputs required. The processor also handles the routing of multi-track and a 4-zone (mix minus) to the Yamaha XMV4280-D Dante-enabled 4-channel amplifier. Yamaha VXC8W speakers were chosen for their clarity and ease of installation. The speakers are zoned for maximum gain before feedback. With assistance from a Dugan MY-16 Auto Mixer card installed in the MTX5-D and the extensive parametric EQ capabilities on each zone output.

Harper said the volume and clarity before feedback was staggering for both courtroom and meeting pre-sets. The presets were stored in the Yamaha MTX5-D library. Recall is available from an in-wall mounted Yamaha DCP1V4S-US controller that the clerk has at his/her fingertips. “Overall Yamaha was selected because of its new all-in-one CIS solution.”

ACIR also installed a Yamaha HS Studio Monitor along with 16 Shure MX418 D/C microphones.

For more information on ACIR Professional, visit www.acirpro.com.

For more information on Yamaha CIS products, visit www.yamahaca.com.

-END-

PHOTO CREDIT: Digital Warmth

About Yamaha Commercial Audio Systems, Inc.:
Yamaha Commercial Audio Systems, Inc. (YCAS) provides a full line of integrated professional audio products offering complete systems solutions for the broadcast, sound reinforcement/installed sound, touring, commercial recording, and post production markets. With the addition of NEXO to the product line, the company remains the official U.S. and Canadian distributor for all NEXO speaker models. YCAS offers comprehensive in-house and field product training for its customers, a dedicated dealer network, and 24/7 technical support.

Screen Innovations—The World Needs the Best Bigger

Austin, TX—May 22, 2014—Screen Innovations (SI) has enlarged Black Diamond™, the world’s most popular ambient-light-rejecting screen and the ideal choice for commercial integrators who need Black Diamond™ quality in a larger format. The largest Black Diamond™ screens to date feature 1.4 gain in new sizes: 16:9 120” and 2.35:1 150”, in Fixed and Zero Edge formats. The larger Black Diamond screens, as well as other recently designed additions to the SI family, continue to make SI the fastest growing screen company in the world.

Black Diamond, the world’s only vertical and horizontal ambient-light-rejecting screen, has a multi layer optic that reflects only the light generated by the projector resulting in a 900% boost in contrast. Additionally, Black Diamond is the only screen that greatly benefits dark environments by reducing light scatter by over 75%. The result is the richest, sharpest image, with the best blacks now available from a screen.

Ryan Gustafson, President of Screen Innovations, boldly announced, “At SI, we believe innovation means that a design is never complete, just more perfect with each iteration. He continued, “We are excited to announce that plans are underway to invest in and expand our production capability to better support today’s large display needs. Our customers asked, and we delivered.”

All Black Diamond screens feature active 3D capabilities and are future-proofed and 4K ready. Screen sizes start at 80” fixed, curved, motorized, and popular Zero Edge formats.

Screen Innovations will exhibit at InfoComm June 18-20, 2014, in Booth #419 in the North Hall. Stop by to see the next generation of video projection screens demonstrated with projectors from our partners, DPI, Epson, and Vivitek.

Manufacturers Suggested Retail Pricing: Starts at USD $2,199.00
Availability: May 2014

Screen Innovations makes it easy to choose the right screen for each application, based on lighting, room size, seating distance, and more. Visit www.screeninnovations.com to check out the Screen Calculator, Screen Wizard, and Projector Wizard online tools.

About Screen Innovations
Based in Austin, Texas, Screen Innovations is a leading manufacturer of projection screens and associated technologies for residential and commercial applications. Best known for Black Diamond™, the world’s first and only multi-directional ambient-light-rejection projection screen technology, SI has effectively revolutionized the two-piece projection category by pioneering and producing screens that deliver an unparalleled video image in light or dark environments. Sold at affordable price points and designed to blend flawlessly with surrounding décor, SI projection screens deliver stunning images and a fully immersive entertainment experience that rivals or surpasses traditional displays. Operating under the principle of “No matter the budget, Screen Innovations has the best available screen solution to suit your needs.” SI produces a comprehensive assortment of screens and accessories for nearly any budget or application.

Visit www.screeninnovations.com or call 512-832-6939. Follow us on Facebook @screeninnovations and on Twitter @SIScreens.

RF VENUE INTRODUCES RF OPTIX™

ASHLAND, MASSACHUSETTS – MARCH 2014: Wireless audio manufacturer RF Venue has released the RF Optix™ RF to fiber optic conversion system, a powerful new tool for mainstream wireless microphone users that expands the possibilities of antenna distribution and wireless audio design.

“RF Optix brings technology from the world of broadcast and IT into the reach of church, school, and theater wireless users,” says CEO Chris Regan. “Integrators, tour managers, and church technicians are now able to do things with fiber that would have been way out of budget, or downright impossible, with coaxial cable.”

The RF Optix system leverages the low cost, lossless characteristics of fiber optic cable over the expensive, fragile, lossy characteristics of coaxial cables. Fiber cable runs thousands of feet long are possible with negligible in-line attenuation, so antennas can be remoted in venues far away from racks or equipment rooms located elsewhere in the facility.

“One of the main constraints for distributed antenna systems for wireless audio is the cost and signal loss challenges of coax cables,” says Regan. “This is especially true for plenum installs, where plenum rated coax can exceed the cost of the entire audio system. With inexpensive plenum rated fiber cables, system designers can now rethink their equipment layouts without sacrificing the huge performance benefit of using a remote antenna system for their wireless system.”

The RF Optix system is offered as a single channel for connecting to one antenna or in a dual channel package for diversity antenna systems. The Install Package includes wall or rack mountable flanges and the Live Package includes a hard-shell carrying case. Both options include 10’ BNC to SMA adapter cables for connecting to antennas and wireless rack equipment; 9V screw-on power supplies are also provided. Available accessories include 100m single mode plenum fiber cables and 100m indoor/outdoor reinforced fiber cables. Custom fiber cable lengths are available.

ABOUT RF VENUE RF Venue is a new wireless audio company specializing in remote antennas, RF distribution equipment and RF signal management and monitoring systems for audio/video installations and live sound events.

http://www.rfvenue.com

Contact RF Venue at 800-795-0817 or email orders@RFvenue.com for further details.

Shotoku Broadcast System To Unveil Revolutionary New Camera Tracking System at 2014 NAB Show

NAB Booth C 8731

Click to visit Shotoku at NAB

Company Set to Showcase Complete Range of Superior Pan & Tilt, Control and VR Tracking Solutions

Staines, UK – Shotoku Broadcast Systems, the well-established leader in manual and robotic camera support, and virtual reality tracking, is introducing in joint cooperation with ncam, a leading manufacturer that enables virtual production through real-time camera tracking, the revolutionary new ncam Camera Tracking System at this year’s 2014 NAB Show, Booth C8731. In addition, Shotoku will be exhibiting its complete range of advanced robotic camera systems, including its line of pan & tilt heads, control systems and VR camera tracking solutions aimed at all News, Sports and TV Shopping applications as well as systems designed specifically for Government, Legislatures and Houses of Worship. Several significant new product developments will be on show further expanding system capabilities and bringing even more flexibility and cost-efficiency to TV studio operations requiring fully robotic cameras.

The ncam Camera Tracking System features a multi-sensing bar that is unobtrusively mounted on the studio camera and provides real-time data to its associated tracking server. ncam provides complete 8-axis 3D position information via industry standard protocols compatible with any VR/AR graphics system. It is suitable for a wide range of applications both indoor and outdoor, with mounted or even hand-held as well as Steadicam cameras. The system joins Shotoku’s well-established series of advanced encoder-tracking systems.

As part of its range of leading VR camera tracking solutions, the company is also showcasing its advanced TK-53VR crane, which is unmatched in terms of mechanical stability, control precision and tracking sensitivity offering a truly exceptional level of all-round performance for any VR or AR production. In addition, the company’s highly successful TP-90VR full X-Y tracking pedestal will be shown in live demonstrations in the Vizrt booth (Number SL2419).

Easily customizable for government, legislature and houses of worship environments, Shotoku’s robotic solutions, such as the TG-18 and TG-27 pan & tilt heads, height drive and fully robotic pedestal systems feature precise remote control capabilities. The company’s entire range of control systems will be available for demonstration including the TR-HP Hot panel, TR-S legislative panel and the TR-8T touch-screen based robotics control system.

“Shotoku will have an array of products and solutions on display at this year’s NAB show, ranging from the brand new ncam camera tracking system to our technologically superior and robust pan & tilt heads, control systems and VR camera tracking solutions,” says James Eddershaw, sales director, Shotoku. “For years, Shotoku has been leading the way in providing advanced manual and robotic camera support, as well as virtual reality tracking solutions to the broadcast market, and we are looking towards this year’s NAB to reach industry professionals with updates and demonstrations of our various product lines.”

About Shotoku Broadcast Systems
Shotoku Broadcast Systems is an international leader in the manufacture and marketing of a full range of camera support products with emphasis on manual and robotic pedestals and pan/tilt heads for the television broadcast industry. The Company also provides robotic camera systems capable of interfacing with third-party equipment. Established as an engineering design firm specializing in advanced mechanics and electronic control systems, Shotoku maintains headquarters in Japan with offices in Staines, UK and Torrance, CA. The Company’s robotic camera systems are designed, developed and manufactured in Staines, UK. For further information: www.Shotoku.co.uk

Shotoku contact: James Eddershaw
+44 (0) 1784 224650 / mailto:info@shotoku.co.uk

Press contact: Desert Moon Communications / Harriet Diener
+1-845-512-8283 / mailto:Harriet@DesertMoon.tv

SA1360 Ultra High Performance Digital Signage Appliance
for Targeted Communications

Full 1080p HD Video Delivery for Digital Signage Networks

DSE, Las Vegas, NV & San Jose, CA – February 12, 2014 – DT Research™, Inc., an industry leader in the development of information appliances for vertical markets, today announced the SA1360 signage appliance player, providing full high definition (HD) 1080p video performance, delivering a quality digital signage experience.

The SA1360 features the powerful and energy-efficient Intel® Core™ i-series processor (i3 or i7) in a fanless, robust package, providing dual Full-HD video playback yet energy-efficient power consumption. The integrated Microsoft® Windows® 7 Professional operating system offers a highly intuitive menu interface and enhanced flexibility to integrate with other applications.

With DVI and DisplayPort connectors for high-quality video and optimal display experience, the SA1360 powers displays with dynamic content while communicating with the server for updates. The SA1360 also offers up to 128GB of flash storage and up to 8GB of RAM, with TPM 1.2 support, and a PCI Express expansion port. With options for wireless networking, WebDT signage appliances offer flexibility in placement, and support growing digital signage networks.

The SA1360 is complimented by the web-based WebDT Content Manager software for intuitive remote management of content and device functions. Bundled with all WebDT signage appliances, WebDT Content Manager offers an easy-to-use interface for organizing, scheduling, and distributing content, and supports numerous media formats (e.g., images, videos, Flash, URL, RSS, and Microsoft PowerPoint). Flexible screen layout options with multiple zones and layers enable a screen to be divided into up to eight areas with different content in each zone to mix images, text, and real-time video within a screen. This detailed management software allows quick updates over an IP network connection for real-time or scheduled content playback and automatic content download recovery to prevent downtime. The newly released WCM 6.0 Pro now adds built-in Widgets, one-click publishing, an enhanced schedule interface, and more multiple-screen deployment tools.

The WebDT Signage System offers innovative digital signage hardware integrated with intuitive web-based content management software enabling effective targeted communications. With a range of high-powered signage appliance players for single and multiple screens, the WebDT Signage System delivers dynamic visual messages to optimize customer experience while driving sales.

About DT Research
DT Research™ develops and manufactures web-enabled information appliances for vertical applications. The WebDT family of products is based on thin computing platforms for secure, reliable, and cost-effective computing. WebDT products include digital signage solutions, wireless tablets, point-of-service handhelds, compact modular systems, and display-integrated information systems. These systems emphasize mobility, wireless connectivity and touch displays. Powered by Windows® operating systems, WebDT systems offer durability and ease in integration, leading to solutions that can be remotely managed with the comprehensive WebDT Device Manager software.
For more information, visit http://signage.dtri.com.

DT Research and WebDT are trademarks of DT Research, Inc. All other brands and product names may be trademarks and/or registered trademarks of their respective owners.

SA1360 Ultra High Performance Digital Signage Appliance

DEFIANTLY INNOVATIVE, DANLEY ENTERS THE COLUMN SPEAKER MARKET WITH THE SBH-10 “SKINNY BIG HORN”

GAINESVILLE, GEORGIA – FEBRUARY 2014: Danley Sound Labs broke into the house of worship market by skirting convention with its patented Synergy Horn and Tapped Horn technologies and is currently taking the sporting arena market by storm by one-upping line arrays with its unique Genesis and Jericho Horns. The recipe is easy to explain but almost impossible for anyone without Tom Danley’s unique acoustics background to pull off: Danley starts back at the fundamental physics of loudspeaker design to overcome trade-offs that are inherent to conventional designs. So it is again with column speakers. The new Danley SBH-10 “Skinny Big Horn,” uses Danley’s patented Paraline technologies to deliver the aesthetic benefits of a column speaker but with much greater fidelity, superior pattern control, no spurious lobes, and no requirement for complicated signal processing.

At a weight of one-hundred pounds and with dimensions of 60” x 9” x 9”, the SBH-10 is composed of eight 5-inch coaxial drivers and acts as a single large Synergy Horn with the directivity of a horn over twenty-five feet! Its coverage pattern measures 140 x 10 degrees, and its frequency response extends from 77Hz to 15kHz, +/-3dB.

“Danley’s new Skinny Big Horn series meets the aesthetic desire for a low profile column shape,” said Mike Hedden, president of Danley Sound Labs. “But shape is where the similarities between conventional column speakers and the Danley Skinny Big Horn end. Using our patented Paraline technology, the SBH-10 has the directivity of a twenty-five foot long horn, yet it is only nine inches deep! Moreover, due to horn loading, the SBH-10 has a sensitivity of 99dB, which is 10dB greater than similar sized cone-loaded products, and because it has such a high power handling rating, is capable of close to 20dB greater output when compared to similarly sized, front-loaded designs. The Danley Skinny Big Horn is a technological leap: no spurious lobes, forward directivity that other manufacturers can only dream of which allows it to even be flown away from a boundary, extremely tight vertical coverage, wide horizontal coverage, and – most importantly – audiophile fidelity. If all that weren’t enough, the SBH-10 requires only one amplifier channel and no special signal processing.” There’s a new leader in the column loudspeaker market. The SBH-10 and its not even a column, it’s a Skinny Big Horn!

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology. www.danleysoundlabs.com

Be sure to watch this YouTube video where Doug Jones explains yet another breakthrough technology from Danley Sound Labs: http://youtu.be/b8cX5Xs_vZg

FOR-A’s FT-ONE 4K Camera Awarded 2013 Government Video Salute, Used for NASA Space Launch

Cypress, CA – FOR-A’s FT-ONE full 4K variable frame rate camera was awarded a 2013 Government Video Salute Award. Presented by Government Video magazine, the awards honor the 10 most innovative products on the Government Video Expo show floor. GV Expo was held last month at the Walter E. Washington Convention Center in Washington, D.C.

In its GV Expo booth, FOR-A demoed the FT-ONE 4K super slow motion camera with its new 4K extraction system, the ZE-ONE. The company showed high-speed footage from the FT-ONE taken during NASA’s recent launch of the MAVEN (Mars Atmosphere and Volatile Evolution) spacecraft on a 10-month mission to explore Mar’s climate history. Capable of recording up to 900 frames per second (fps), the FT-ONE captured stunning 4K footage of the event with a FUJINON Premier 4K+ PL Cine zoom – the 75-400mm T2.8-T3.8 (HK5.3×75).

During his GV Expo keynote presentation, Rodney Grubbs, Program Manager at NASA Marshall Space Flight Center, noted the FT-ONE’s performance in his discussion about 4K and NASA’s search for new technology.

“FOR-A is honored to have the FT-ONE recognized as one of the best products at GV Expo, an event where so many great technologies are shown,” said Hiro Tanoue, FOR-A Corporation of America’s President. “The FT-ONE is ideal in many different applications, from sports and broadcast events to rocket launches. We look forward to seeing innovative, new ways the camera will be used in the future.”

In Government Video’s announcement of award winners, the FT-ONE was described as follows: “If you saw the FT-ONE 4K Variable Speed Camera video that FOR-A showed continuously at GV Expo 2013, you would immediately know why the camera was chosen. Its stunning resolution and hypnotically smooth ultra-slow-motion turned a blast from a tank’s cannon into kinetic art.”

The FT-ONE employs FOR-A’s high-sensitivity CMOS color sensor, “FT1-CMOS,” and plays back full 4K (4096 x 2160 pixels). One output channel can provide QFHD (four 1080p 3G-SDI) outputs, while the other output channel provides down-converted HD-SDI for live viewing and play back. The FT-ONE captures images as uncompressed raw data on the system’s internal memory, which has a recording capacity of 9.4 seconds. This data is then stored on one of two hot-swappable SSD cartridges, each of which is capable of storing 84 seconds of full 4K resolution images at 900 fps.

About FOR-A

FOR-A is a major manufacturer and distributor of video and audio systems to the broadcast, postproduction and professional video markets. For more information about FOR-A’s product line, call 714-894-3311 or visit our web site at www.for-a.com.

FSR’s GV Expo / GovComm13 Exhibition Plans Offer Something for Everyone

Government Attendees Get First-Hand Look at Company’s Rugged Lines of HDMI Cables, Fire Resistant Boxes, Installation Tools and a Multi-User Collaboration System

Washington, DC – FSR, leading manufacturer of a wide variety of products for the audio/video, education, hospitality, government, and religious markets, will command an audience at this year’s co-located Government Video Expo / GovComm13 shows in Washington, DC (Booth 522). This year, attendees in the government and military fields will get a first-hand look at the company’s new Digital Ribbon mega-bandwidth HDMI cables, FRK Fire-Resistant Floor Box System, DR-Sock Cable Pulling Tool and HuddleVU multi-user collaboration system.

“We are excited to bring our newly expanded and varied lines of products to the government and military market at this year’s GV Expo / GovComm13 co-located shows,” said FSR president Jan Sandri. “Our industry award-winning products, such as our Digital Ribbon Cables that were singled-out earlier this year at InfoComm 2013, and our other product families are must-haves for these professionals working in the broadcast, Pro AV and installation markets. We look forward to showcasing our reliable and diverse lines and new technology solutions to this important and ever growing market.”

Based upon a proprietary composite technology, FSR’s Digital Ribbon Cables offer users the capacity to carry 1080p and 4k x 2k HDMI signals up to 325 feet, nearly twice that of other “extended” solutions, with crystal clear accuracy. The product’s ultra-simple, fast installation (just pull and plug), and money-saving ability to operate without transmitters or receivers add to its appeal.

The company’s new FRK Fire-Resistant Floor Box System expands the versatility of its floor box line by providing enhanced, fire-resistant versions of its existing products. FRK kits are UL listed and comply with UL 263 Fire Resistance Ratings. Systems are available in a number of configurations, available online at the company’s website.

FSR’s new DR-SOCK is a handy and affordable cable-pulling tool designed to simplify and accelerate every installation requiring cables and connectors. Intended for every installer’s toolbox, DR-SOCK is pre-assembled, easily accessible in frustration-proof packaging, and re-useable. It protects cables and connectors from being damaged by taking the stress off the connection points while pulling through a conduit. The design opens up to 1.25 inches, and features brightly colored sleeve tips to enable easy identification, and a steel ring to allow quick and positive attachment of a pull snake. DR-SOCK can be used to safely pull FSR’s new Digital Ribbon Cables as well as others with connector shells.

The HuddleVU collaboration system allows for multiple users to share and view their laptops, tablets, and smart phone screens on a main display. Unlike conventional presentation systems, anyone participating can be a presenter or an audience member at any given time at the push of a button. LED’s indicate which user is currently live and when the system is busy.

As always, all FSR products are made of durable materials in the USA.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com.

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • mailto:harriet@desertmoon.tv

Zylight to Show New F8 LED Fresnel at GV Expo

LOS ANGELES – Zylight, a leading manufacturer of innovative LED lighting solutions, will demonstrate its new F8 LED Fresnel at Government Video Expo 2013, which runs Dec. 4-5 in Washington, D.C. (Booth 838). While the F8 draws only 100 watts, it has close to the light output of a traditional 1000-watt Fresnel. Plus, it collapses to less than four inches thick for easy transport and storage.

“The F8 LED Fresnel is a great choice for government agencies that need to update their studio lighting grids, because it is much more energy efficient than traditional Fresnels and generates almost no heat,” said Charlie Collias, senior vice president, worldwide sales. “It’s also a great light on location because it’s water resistant, easy to transport, and you can plug it in or power it with a camera battery.”

Available in tungsten (3200K) or daylight (5600K) versions, the fully dimmable F8 maintains single shadow traditional Fresnel beam shaping. Equipped with an eight-inch SCHOTT glass lens, it features a patented focusing system for spot and flood operations. With a CRI (color rendering index) of 97 or better, its beam spread is adjustable between 16-70 degrees for even coverage for widescreen productions.

Like other Zylight models, the F8 is equipped with ZyLink wireless technology, which makes it easy to link multiple Zylights for simultaneous remote control. The F8 ships with barn doors and yoke mount, but additional accessories are available separately.

Zylight will also demonstrate its IS3c LED light, an updated version of its acclaimed IS3 large panel cyclorama and beauty light, at GV Expo. Now shipping with a custom soft box produced exclusively by Chimera, the fully dimmable IS3c is a wide, high-output soft light with built-in controls for adjusting color temperature, color correction, and Zylight’s Color Mode, which produces millions of colors without gels or filters.

ABOUT ZYLIGHT LLC

Founded in 2003, Zylight LLC is the leading manufacturer of intelligent LED lighting instruments for the film and video production industry. Every model in its easy-to-use lighting system produces fully calibrated bright white light, while some also provide a spectrum of adjustable colors without gels. Full wireless control and DMX integration are included, and AC or DC power options are available. The Zylight state-of-the-art LED system is truly the most unique and flexible lighting system on the market today. With more than 50 dealers worldwide, Zylight continues to develop innovative LED lighting solutions to help make your job easier. More Than Bright – Zylight. Find out more at www.zylight.com.

Digg Syndication Del.icio.us Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: GV Expo Newslink, News, Tradeshow News |

FOR-A to Exhibit at Upcoming Government Video Expo

Cypress, CA – FOR-A will demo several products at next month’s Government Video Expo, which takes place December 3-5 at the Walter E. Washington Convention Center in Washington, D.C. The company will exhibit in booth #807 and show switcher, multi-viewer, video stabilizer and video clip server
technology.

“Government Video Expo is a premiere event that brings video production and broadcast equipment suppliers together with key decision makers in government technology,” said Jay Shinn, Northeast Account Manager at FOR-A. “FOR-A offers several solutions that are ideal for government applications, and the show is a good opportunity to showcase our technology specifically to this market.”

FOR-A will demonstrate its popular video production switchers, including the
HVS-XT110 HD/SD portable video switcher. The latest in the company’s popular line of HVS Series switchers, the HVS-XT110 features a compact, integrated design and comes standard with 12 HD/SD-SDI inputs and eight outputs, and enables nine outputs, including one HDMI output, to be freely assigned.

Another production switcher in FOR-A’s booth will be the compact, cost-effective HVS-390HS. The switcher comes standard with 16 HD/SD-SDI inputs, eight outputs plus an HDMI output. With the addition of optional input/output boards, the system expands to 24 inputs and 13 outputs. FOR-A recently introduced new switcher features that take mix effects (M/E) technology to the next level and upgrade the AUX bus system to perform with powerful M/E functionality.

FOR-A will also have the IVS-710HS HD/SD video stabilizer on hand. The high-performance, compact video processing solution corrects unwanted camera movement and vibrations while maintaining camera pan and tilt movement.

Additionally, FOR-A will show its MV-1620HS HD/SD high resolution multi-viewer. The cost-effective unit features PC-based software that enables users to easily create screen layout, embedded audio level display for up to 16 channels per input, and title display of up to 16 characters per input. The layout memory of the MV-1620HS is capable of saving up to 16 layout patterns in the main unit, which can be selected directly from the front panel.

The MBP-100SX video clip server will also be showcased at Government Video Expo. The reliable solution records and plays MXF files and can be used in a variety of applications, including ingest, playback, and even program playout using a playout system.

About FOR-A

FOR-A is a major manufacturer and distributor of video and audio systems to the broadcast, postproduction and professional video markets. For more information about FOR-A’s product line, call 714-894-3311 or visit our web site at www.for-a.com.

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

October 2014
M T W T F S S
« Sep    
 12345
6789101112
13141516171819
20212223242526
2728293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication