A virtual press conference from Sound & Video Contractor

Archive of the GV Expo Newslink Category

DANLEY UPS THE SPLS ON ITS SH SERIES OF SYNERGY HORNS

GAINESVILLE, GEORGIA: Not content to rest on its laurels, Danley Sound Labs announces improvements to many of its already highly-regarded SH-Series full-range loudspeakers. The new versions are identified by the suffix “HO,” which stands for “high output.” For example, the if one wishes to get the most performance out of the Danley SH-96 they should order the Danley SH-96 HO. The new designs use a more powerful two-way high frequency. As a result, the low- and mid-frequency drivers can now be driven to their full potential while still maintaining Danley’s characteristic frequency response, phase response, and fidelity. In conjunction, the new designs use a new crossover and have additional options for bi-amping and for changing the low-frequency impedance. Because the cabinets themselves haven’t changed, the new versions retain the coverage and frequency loss patterns of the originals. The new models include the SH-95 HO, SH-96 HO, SH-64 HO

“The original versions can be easily modified to become the new ‘High Output’ versions,” explained Ivan Beaver, lead engineer at Danley Sound Labs. “It just takes the new high frequency driver, a new crossover, and a new switch panel.” In addition, the midrange drivers are also wired a little differently, which is incorporated as part of the new crossover wiring harness. “There are two options on the new switch panel,” said Beaver. “First, there’s a biamp/passive switch. In passive mode, the new cabinets run pretty much like the old versions, except that the mid/high section will be relatively louder than the woofers, assuming the woofers are running at 8ohms.”

He continued, “And that’s the second option. Users can select a woofer impedance of either 2ohms or 8ohms. Some people do not like to run at 2ohms, whereas others may need the additional output when using smaller amplifiers. The wire run should also be considered when choosing the impedance. With a 2ohm load there will be more loss across the wire. How much loss will depend on the size of the wire and the length of the run. An 8ohm load will have a higher damping factor than a 2ohm load, and it is of course easier to bridge an amp into an 8ohm load than into a 2ohm load.” In biamp mode, the mid/high section takes the crossover circuitry and the low section thus has no built-in crossover.

Because the new switch panel cannot be expected to operate reliably if left exposed to the elements, weatherized versions of the new High Output loudspeakers must be pre-ordered with specified biamping and impedance settings.

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology. www.danleysoundlabs.com

Shotoku Broadcast to Highlight Manual Camera Support Range at BVE 2013

BVE Stand # L13

Staines, UK • Shotoku Broadcast Systems, a well-established leader in manual and robotic camera support, and virtual reality tracking, today confirmed plans to exhibit at BVE – 26 to 28 February 2013 – to be held at EXCEL London. The Company will demonstrate its globally renowned product line in Stand L13 and be available for customer consultations and meetings with potential distribution partners.

BVE is the largest gathering of production, post and content delivery professionals in the UK with attendance numbers expected to exceed 16,000. Shotoku will join over 300 exhibitors who will showcase products, services and technologies, ranging from camera accessories to workflow solutions.

Shotoku will highlight the manual side of its high quality and innovative camera support systems, including pan and tilt heads, pedestals, tripods and virtual reality systems. “BVE offers an excellent opportunity to network with industry professionals and promote our rapidly growing product ranges to operators and key decision makers,” said David Shepherd EMEA Sales Manager, Manual Products.

About Shotoku Broadcast Systems
Shotoku Broadcast Systems is an international leader in the manufacture and marketing of a full range of camera support products with emphasis on manual and robotic pedestals and pan/tilt heads for the television broadcast industry. The Company also provides robotic camera systems capable of interfacing with third-party equipment. Established as an engineering design firm specializing in advanced mechanics and electronic control systems, Shotoku maintains headquarters in Japan with offices in Staines, UK and Torrance, CA. The Company’s robotic camera systems are designed, developed and manufactured in Staines, UK. For further information: www.Shotoku.co.uk

# # #
Shotoku contact: James Eddershaw
+44 (0) 1784 224650 / mailto:info@shotoku.co.uk

Press contact: Desert Moon Communications / Harriet Diener
+1-845-512-8283 / mailto:Harriet@DesertMoonComm.com

SYMETRIX INTRODUCES COST-EFFECTIVE AUDIO INPUT/OUTPUT EXPANSION DEVICES FOR USE WITH SYMNET EDGE AND RADIUS DANTE NETWORK AUDIO DSP

SEATTLE, WASHINGTON – JANUARY 2013: Symetrix announces today the release of the cost-effective SymNet xIn 12 and xOut 12. These products increase a system’s analog input or output channel capacity resulting in a reduction in overall price per channel.

Designed exclusively for use with SymNet Edge and Radius DSP units, each of the twelve studio-grade analog inputs’ and each of the twelve studio-grade outputs, along with bus assignments, are configured using SymNet Composer open architecture software. The xIn 12 and xOut 12 set-up is logical and fast with no requirement to use third party software. There are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure.

Noted CEO, Paul Roberts, “Whether you are scaling up a SymNet Edge system, a SymNet Radius system, or one that combines the two, the xIn 12 and xOut 12 create larger systems with smaller price tags.”

ABOUT SYMETRIX Symetrix engineers high-end professional audio solutions, specializing in DSP hardware and software. Symetrix products are distributed worldwide, and designed and manufactured in the U.S. at the Seattle area headquarters. Since 1976, customers have enjoyed the benefits of Symetrix’ independent ownership and management. For more information on Symetrix professional audio products, please visit www.symetrix.co or call +1 (425) 778-7728.

KanexPro Releases HDBaseT Scaler for Presentation Systems

Introducing the next-generation in ultimate presentation scaling and switching, KanexPro announced today the HDSC12D scaler to its pro-line of high-resolution scalers.
This 12-input high resolution scaler boasts a twisted pair output based on HDBaseT® technology that will compensate for long runs up to 230 feet (70m) while switching and scaling up to 12-inputs. It includes an independent receiver, which extends the HDMI output. Fully HDCP and EDID compliant, this professional scaler can be used anywhere from lecture halls, conference rooms to health care facilities and control centers.

Features:
• Switch & Scale 12-inputs to 2-high-resolution displays
• 4 HDMI + 4 VGA Inputs with 3.5mm Audio
• 1 YPbPr + 1 Composite / S-Video Input with L/R Stereo Audio
• 1 Microphone Input
• 1 HDMI +1 VGA Output with L/R Stereo Audio (For non-HDCP encrypted content)
• 1 HDMI HDBaseT CAT6 STP receiver included
• Extender supports distance up to 230ft [70m]
• Supports scaling input up to 1080p
• 2 x 10 Watt Amplifier
• IR remote control included
• RS-232 & TCP/IP control with third party control systems
• Backed by KanexPro 3 -Year Parts & Labor Warranty

For more information, please visit: http://www.kanexpro.com/item/?id=HDSC12D

Ultimate in Presentation Switching Environments

FSR’s New CORE Product Line Addresses Floor Space Challenge

COOL OVERHEAD RACK ENCLOSURES OFFER SOLUTIONS FOR CLASSROOMS, BOARDROOMS AND MEETING ROOMS

Woodland Park, NJ – FSR, manufacturer of audio and video switching, control products, and connectivity boxes, is debuting its new CORE family of products to help solve the challenges of today’s classrooms, boardrooms and meeting rooms where floor space has reached an all-time premium.

With FSR’s Cool Overhead Rack Enclosures (CORE), which consists of the Ceiling Box family of above ceiling rack enclosures, and the brand new Top Shelf wall mounted rack enclosure, the company can offer viable options to facilities which can no longer afford to devote floor space to equipment racks or credenzas.

“Let’s face it, many facilities today just don’t have the same amount of floor space any longer to devote to large equipment racks,” says Jan Sandri, president, FSR. “With our new CORE family of products, FSR has the solution. We are thrilled to be able to introduce these powerful options to the industry, which includes the Ceiling Box family and Top Shelf wall-mounted rack enclosure, that target today’s challenges of space constraints.”

The Ceiling Box family is installed in a standard 2’ x 2’ or 2’ x 4’ drop ceilings and provides from 2 ½ rack to 4 full rack spaces for equipment mounting. Optionally, the Ceiling Box family can be equipped with a projector pole mount adapter so that the projector can mount directly to the ceiling box and cables can disappear through the pole.

The newest member of the CORE family is the Top Shelf wall mounted rack. Top Shelf mounts to a wall just below the ceiling in installations without a drop ceiling or where space above the drop ceiling is limited. The Top Shelf provides four rack units of mounting space and the plastic cover allows RF and WiFi signals to pass unobstructed between the equipment and the room.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

FSR complies with the American Recovery and Reinvestment Act of 2009 and is a woman owned business. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information visit www.fsrinc.com.

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

ASHLY’S PEMA™ HOLDS UP IN COURT

WAPAKONETA, OHIO: Construction of the Auglaize County Courthouse was completed over a century ago in 1894. Occupying a full city block in downtown Wapakoneta, Ohio, the building stands true to its original design. Ornate and dignified sandstone frames the two-story structure, which is capped by a clock tower and a recently renovated statue of Lady Justice. In order to bring its capabilities in line with 21st Century expectations while still retaining the charm and repose of its 19th Century origins, the county renovated the Auglaize County Courthouse to the tune of $30 million. Among the myriad renovations was an overhaul of the audio/visual systems installed in its three courtrooms. With limited space, a strict budget, and future-proof expectations, local integration firm RG Sound & Communications centered each courtroom’s new system on an Ashly Pema 8125.70 integrated processor and amplifier.

“One of the first things that the county officials pointed out was how long the courthouse had been serving the community,” said Shawn Snider, project manager at RG Sound & Communications. “They expected these renovations to serve on a similar timescale. That meant that we needed to design and install an audio/video system that would be sufficiently flexible to meet their unanticipated needs many years into the future. For that reason, and because they had a tight budget and limited (19th Century) closet space, we felt that the Ashly Pema, which offers eight channels of fully-featured matrix processing and eight amplifier channels in a two-rack space chassis, was the perfect choice.”

With only slight variations, the installed A/V system in each of the three courtrooms is more or less identical. Eight court-supplied microphones feed a court-supplied (and government-inspected and certified) recorder. Its mixed output feeds the first input on the Ashly Pema, and a redundant summed line feeds the unit’s second input. The remaining six inputs receive signal from an NTI audio/video matrix mixer, which is in turn fed by audio/video outputs at the lawyers’ tables and at other strategic locations throughout the courtroom. Computer control of the NTI matrix resides with the judge, who can patch any video input to any video output (including individual retractable flat screen monitors for each juror). Audio can be played in the courtroom if the judge so chooses. Because more than one video input can be selected at one time, the system accommodates multiple audio sources using the Ashly Pema’s inputs three through eight. The Ashly Pema’s eight amplifier channels power a distributed in-ceiling collection of Community DS8-series loudspeakers.

“Because no audio technician would be on hand during proceedings, we used the powerful DSP capabilities of the Ashly Pema to provide consistent, intelligible audio from the microphones and from the A/V output,” Snider said. “By using the Ashly Pema over a separate DSP/amplifier solution, we were able to help the county stay on budget. Moreover, both the NTI A/V matrix and the Ashly Pema reside comfortably on the network, making it easy for us to make changes for them remotely. The fact that we can lock out the front panel of the unit ensures that no unqualified technicians will attempt to make changes to the system.”

ABOUT ASHLY AUDIO Ashly Audio Inc. is recognized as a world leader in the design and manufacturing of high quality & high performance signal processing equipment and power amplification for use in the commercial sound contracting and professional audio markets. The 37-year old company is headquartered in Webster, New York U.S.A.

www.ashly.com

Cobalt Digital’s Blue Box Group™ Wins “SALUTE” Award From the Editors of Government Video

WASHINGTON, D.C. — Cobalt Digital’s Blue Box Group™ is the recipient of the 2012 Government Video SALUTE Award presented by the editorial staff of Government Video magazine during the 2012 Government Video Expo. BlueBox™ is Cobalt’s new line of interface converter boxes that deliver peak performance from low-cost, compact modules.

Founded in 2003, Government Video’s SALUTE Award is designed to honor and showcase innovative technologies, products and services for the public sector demonstrated at Government Video Expo. Industry professionals, Government Video editors and contributors nominate candidates for Government Video SALUTE Awards with the decisions on the final awards made by Government Video’s editors.

“The Government Video SALUTE recognizes some of the innovative products and services for video professionals on display at GV Expo. We are proud to call attention to these tools that specifically help public-sector video professionals support the missions of their agencies and provide better information to the citizenry,” said J.J. Smith, editor of Government Video.

Cobalt’s easy-to-operate BlueBox™ modules attach easily and securely to cameras or host device chassis for dependable, uncomplicated installation. They receive power directly via USB from video monitors or other equipment without bulky and non-secure “wall wart” adapters.

“Cobalt recognized the need for first-class quality and affordable signal conversion in a compact package,” commented Chris Shaw, Cobalt EVP of Sales & Marketing. “BlueBox delivers exceptional performance from a small footprint with a full feature list packed into one convenient converter box; perfect for applications that need to stretch the budget but not compromise on quality.”

Government Video (http://www.governmentvideo.com)is the only magazine dedicated to providing comprehensive coverage of video professionals in all levels of public service. The magazine is published by NewBay Media LLC, the world’s largest publisher of audio and video publications. NewBay Media and Government Video are the organizers of the annual Government Video Expo, the largest trade show targeting government buyers and suppliers of video, AV, broadcast and multimedia technology.

ABOUT COBALT DIGITAL INC.
Cobalt Digital Inc. designs and manufactures award-winning 3G/HD/SD-SDI conversion gear for the broadcast television environment. Distributed through a worldwide network of dealers, system integrators, and other partnerships, Cobalt products are backed with a 5-year warranty. For more information, visit http://www.cobaltdigital.com.

# # #

Company Contact: Chris Shaw, EVP of Sales and Marketing
+1-217-344-1243 / chris.shaw@cobaltdigital.com

Press Contact: Desert Moon Communications / Harriet Diener
+1-845-512-8283 / harriet@desertmooncomm.com

QSC Introduces the New AcousticPerformance™ Line of Loudspeakers


Costa Mesa, CA (December 5, 2012) – QSC Audio Products is proud to announce the launch of the AcousticPerformance™ line of professional, two-way, full-range loudspeakers, ideal for a variety of installed sound reinforcement applications which require higher SPL and a stylish enclosure. All models feature a 3-inch voice coil, high power-capacity compression driver combined with high-output woofers to deliver exceptional full bandwidth reproduction.

“In keeping with QSC’s loudspeaker design philosophy, all AcousticPerformance loudspeakers feature Directivity Matched Transition™ (DMT) which matches the compression driver to the natural coverage angle of the woofer in the cross-over region”, states Phil Sanchez, QSC Loudspeaker Product Manager. “When combined with their axisymmetric waveguides, AcousticPerformance loudspeakers deliver a flat power response with smooth and accurate sonic reproduction and remarkably consistent coverage both on and off-axis.”

AcousticPerformance models may be used in passive (full-range) mode to minimize amplifier channel count or bi-amp mode for greater control and performance. To further enhance performance, bi-amp and full-range tunings using QSC Intrinsic Correction techniques are available for Q-Sys™ and future QSC products.

All models feature M10 mounting points for deployment via eye-bolts as well as mount points for an optional yoke bracket. The AP-5122m multi-purpose enclosure features a 40-degree angle, making it ideal for floor monitor use, and a pole cup for deployment on a loudspeaker stand. The enclosure and terminal input cup on the AP-5122m have been designed to facilitate the cable runs for a clean appearance on stage.

Presenting a clean, unobtrusive look, AcousticPerformance grilles are unadorned, eliminating the need to cover-up logo treatments, which can be difficult to hide or remove. The grille is also lined with acoustically transparent backing, adding to the enclosure’s professional appearance.

AP-5102/5122/5152 models are available in black (RAL 9011) and white (RAL 9010) finishes. AP-5122m is available in black only. To minimize impact and disposal fees at the job site, all AcousticPerformance loudspeakers are packaged in environmentally friendly, recyclable cartons.

Key Features of the AcousticPerformance Line:

•DMT™ (Directivity Matched Transition) ensures smooth, coherent power response across the listening plane
•3” diaphragm compression delivers a clean and powerful high frequency response
•M10 fittings and yoke mount fittings offer flexible deployment options for a variety of applications
•Clean industrial design with unadorned grilles complement most decors and settings
•NL4 Speakon™ connector and covered barrier strip terminals*
•Bi-Amp / Passive Switchable
•Constructed from 15-ply Baltic birch plywood
•16-Gauge powder coated steel grilles
•Available in black (RAL 9011) and white (RAL 9010)*
•Complete EASE, CAD & BIM information available online
* Except for 5122m

For more information, visit the AcousticPerformance product page at http://qsc.com/products/speakers/ap/

About QSC Audio
QSC Audio Products, LLC is a leading manufacturer of power amplifiers, loudspeakers, digital signal processors, digital sound transport, and network audio for professional audio systems worldwide. qsc.com

Industry Veteran John T. O’Keefe Joins Shotoku Broadcast Systems as VP Sales & Marketing

Torrance, CA – Naoki Ebimoto, president of Shotoku Broadcast Systems, the international manufacturer of advanced manual and robotic camera support products, today announced that John T. O’Keefe has been named vice president, sales & marketing. O’Keefe, a highly-respected industry veteran with over 25 years experience, will oversee all sales and marketing operations in North America.

“John enjoys a well-deserved reputation as an expert in the field with high standards and uncompromised integrity,” said Ebimoto. “He not only supports his customers, but truly partners with them to ensure they benefit from the very best operational and business solutions possible. He’s the ideal candidate to drive our business as it continues to expand in North America.”

O’Keefe is best known as president/CEO and co-founder of ProSource, a firm specializing in the import and distribution of broadcast television equipment. He joins Shotoku directly from Panasonic Systems Communications in Secaucus, NJ where he was an area/partner sales manager. O’Keefe previously served ten years as vice president, sales and marketing for Anton Bauer where he had complete sales and marketing responsibility for both the domestic dealer/reseller and overseas distribution networks.

O’Keefe holds a BS degree in Marketing from the University of Bridgeport. He is based in Shelton, CT and can be reached at okeefe@shotoku.tv or +1 866 SHOTOKU.

About Shotoku Broadcast Systems
Shotoku Broadcast Systems is an international leader in the manufacture and marketing of a full range of camera support products with emphasis on manual and robotic pedestals and pan/tilt heads for the television broadcast industry. The Company also provides robotic camera systems capable of interfacing with third-party equipment. Established as an engineering design firm specializing in advanced mechanics and electronic control systems, Shotoku maintains headquarters in Japan with offices in Staines, UK and Torrance, CA. The Company’s robotic camera systems are designed, developed and manufactured in Staines, UK. For further information: www.Shotoku.co.uk

# # #
Shotoku contact: Naoki Ebmioto
1-866-Shotoku • mailto:info@shotoku.tv

Press contact: Desert Moon Communications, Harriet Diener
+1-845-512-8283 / harriet@desertmooncomm.com

FSR Revolutionizes Wall Mounted Raks With Top Shelf

Woodland Park, NJ • FSR, manufacturer of audio and video switching, control products, and connectivity boxes, announces the launch of Top Shelf, a revolution in wall mounted equipment racks. Drawing on their extensive experience with UL Listed Ceiling Racks, FSR designed Top Shelf to provide an unobtrusive and secure enclosure for audio, video and network equipment. Top Shelf mounts to a wall close to the ceiling in locations without drop ceilings, or where space above the drop ceiling is limited.

Top Shelf holds up to 4 RU of equipment with multiple mounting locations for power as well as signal connections for easy installation. The unit’s steel frame ensures the equipment will be securely mounted; and a plastic cover allows wireless signals to pass in and out of the enclosure unobstructed. The cover can be painted to match the room décor, and the box can be mounted in the best location to ease wiring and visual impact.

“Top Shelf is the newest addition to our wall-mounted enclosure line of products,” says Jan Sandri, president, FSR. “With its unique ability to solve challenges many classrooms, boardrooms, schools, hospitals and more face with limited space, we are thrilled to bring this new solution to market. The unit’s ability to pack up to 4RU of AV equipment in a visually appealing housing make it a perfect fit for almost any AV environment.”
For further details contact FSR at (800) 332-3771 or via e-mail at sales@fsrinc.com.
About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

FSR complies with the American Recovery and Reinvestment Act of 2009 and is a woman owned business. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information visit www.fsrinc.com.

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

April 2014
M T W T F S S
« Mar    
 123456
78910111213
14151617181920
21222324252627
282930  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication