A virtual press conference from Sound & Video Contractor

Archive of the ISE Newslink Category

It’s a first: TDC wraps Sydney Opera House and Sydney Harbour Bridge Pylons in projection for Australian Naval Spectacular

Watch the video at: http://bit.ly/19dRyyn

Achieving the very first projection onto both sides of the epic proportions of Australia’s iconic Sydney Opera House as well as onto the pylons of Sydney Harbour Bridge was by no means a small challenge for any technology company.

Australia was celebrating the first entry of the national Australian fleet into Sydney Harbour one hundred years ago and re-telling the story for The Royal Australian Navy’s International Fleet Review. Imagination Australia was the Creative team and Producer of the event, who engaged Technical Direction Company (TDC) as their video technology partner.

An evening spectacular involved video projection that was combined with stunning fireworks launched from seven warships. There was lighting from 28 land and ship locations plus live action on board ships culminating in an aerial fly past from the Royal Australian Air Force that was enjoyed by the millions lining the foreshore.

“The spectacular was created in seven acts, from introducing Australia’s original fleet, through 100 proud years of service to Australia, current capabilities, a moment of reflection for the fallen and a finale to rival Sydney’s New Year’s Eve,” said Heath Campanaro, Project Director at Imagination Australia. “The show was a once in a lifetime project and will go down in history as one of the most inspiring, moving pieces of creativity at this kind of scale.”

We make it happen

Digital video projection onto both sides of the Sydney Opera House and Sydney Harbour Bridge pylons was a first. To create such a visual spectacular, TDC worked for months of planning and testing with Imagination Australia to design and realise the brightest projection ever delivered.

TDC deployed a total of 56 Barco projectors including models FLM-HD20, HDF-W26 and HDQ-2K40 that were positioned at great distances and angles, including projection towers located up to 700 metres away from across Sydney Harbour. It was vital to that the projection was visible from all sides of the Harbour – which had not been done before.

TDC ensured that the content created by Imagination Australia was managed using Dataton WATCHOUT™ multi-image and display software and 26 computer servers. The entire proceedings were synchronised by timecode and transmitted across Sydney Harbour using Reidel MediorNet fibre optic media signal distribution and processing.

“The project took months of planning and days of painstaking projector alignment and positioning to get every pixel lined up and just right across various projectors,” enthused Olin Winton, Technical Manager at TDC.

“Rarely does a project of this epic scale take place in Australia. Our team of projection experts did a great job and we’re very proud of what we’ve delivered,” said Michael Hassett, MD at TDC.

The TDC project team for this event were:

Project Manager: Kain Jones
Technical Manager: Olin Winton
Head Technician: Steve Cain
Projectionists: Drew Ferors, Matt Teale, Anthony Pellizzari, Isaac McKenzie
Projectionist Assist: Max Rowen, Gareth Marsh

The biggest event to happen at Sydney Harbour for years, The Royal Australian Navy’s International Fleet Review was held from 3-11 October 2013.

Watch the video at: http://bit.ly/19dRyyn

Images provided with this story should be credited to: © Technical Direction Company.

SYMETRIX SYMNET RADIUS REVITALIZES THE AUDIO AT THE HISTORIC SUFFOLK THEATER

RIVERHEAD, NEW YORK – NOVEMBER 2013: The Suffolk Theater in historic downtown Riverhead, New York opened its doors for the first time in 1933, and the public faithfully filled its resplendent art-deco interior night after night. Movies put the theater in the black for decades, but proliferating strip malls, the rise of the multiplex, and America’s seedy love affair with the living room couch decimated the Suffolk’s crowds and led to its final performance in 1987. The story is hardly unique to The Suffolk, and twenty years passed before area residents realized what they lost in the bargain. In the past decade, the tides turned, and, under new ownership, The Suffolk Theater responded with the sound of renovation. It recently reopened to tremendous fanfare, and beneath its carefully-restored Depression-era art-deco façade breathes a 21st Century audio/video/lighting system that includes a 36-input/20-output Symetrix SymNet Radius 12×8 Dante networked DSP system.

Award-winning theatre and A/V designer Stuart Allyn of A.D.R. Studios (Irvington, New York) designed and commissioned the new theatrical/audio/video systems at The Suffolk Theater, and Theatrical Services and Supplies (Hauppauge, New York) installed it. “Of course, a lot of thought goes into every aspect of a system like this,” said Allyn. “I went with the SymNet Radius 12×8 because it’s a cost-effective processor that is totally flexible, both in terms of its processing power and its input/output count.” The Suffolk Theater needed a large number of inputs and outputs because the entire system throughout the building is fed from the central FOH position. A wide number of areas (bars, offices, restrooms, backstage, etc.) are all capable of receiving the main show audio (and video in some cases) plus each area, at the touch of a button, can optionally receive a local source such as cable TV or a Blu-ray player. Each area when viewing the stage feed must be time aligned to the stage, and when viewing local sources that timing needs to be synced to the video. Each “zone” required speaker processing for each mode of operation. By having all the system processing centralized and separate, sound mixers using the digital mixing system are free to use whatever systems, EQs etc. they desire to use in the console, while the main speaker and system processing remains in place. The Symetrix system handled all that very easily. To the twelve inputs and eight outputs of the system’s single Radius 12×8, Allyn added two Symetrix SymNet xIn 12 expansion boxes and one Symetrix SymNet xOut 12. Like all products in the Symetrix SymNet Radius and Edge family, the expansion boxes connect to the processor via the robust, low-latency Dante network protocol.

“We’ve used a lot of Symetrix products in the past, and we’ve never had issues,” said Allyn. “Symetrix equipment sounds good and works well at commissioning and over the long haul. In addition, I like using SymNet Composer to build customized processing. I can see the entire system on one screen, and that overview is important to me. Then I can drill down as needed.” The system includes comprehensive Crestron control, but that didn’t stop Allyn from making cost-effective use of Symetrix’ inexpensive ARC-2e wall panel remotes. Eight ARC-2e’s placed at strategic locations in ancillary rooms and spaces allow users to select from presets and to change input sources and volumes. Indeed, several of the Symetrix ARC-2e’s send command strings to the SymNet Radius 12×8 system and to the system’s Crestron video switcher!

Although the super low latency Dante network plays no larger role in the system, the scalability of the Symetrix SymNet system via Dante was a critical factor in its selection. “We designed the system with foresight of possible future expansion in mind,” said Allyn. “There’s a lot of extra wiring in place that will allow them to expand the stage and the dressing room areas. If needed, we can simply add another Symetrix SymNet Radius 12×8 to the system via Dante to accommodate even more inputs, outputs, and processing. It is a beautiful venue that should provide great entertainment to Long Island for many years to come.”

ABOUT SYMETRIX
Symetrix is dedicated to making life sound better. As a world leader in the development and manufacturing of digital audio signal processing (DSP) systems and accessories, Symetrix provides best in class audio management solutions to businesses, schools, non-profits and government organizations.

For more information on Symetrix products visit www.symetrix.co

API APPOINTS STUDIO CONNECTIONS AS AUSTRALIAN DISTRIBUTOR

NUNAWADING, AUSTRALIA: API proudly announces the appointment of its new Australian distributor, Studio Connections for both API modules and 1608 console sales. Studio Connections has been a dominant player in the Australian pro audio market for over twenty years, and has recently completed relocation to its new facility in the Melbourne suburb of Nunawading. The new location is designed with the professional in mind, and prominently features a 1608 demonstration room, offering pros hands-on experience with the console and other API gear.

“Our new facility is fabulous and funky,” said Studio Connection’s Managing Director, Deb Sloss. “We intend to be a relaxed and welcoming space where customers can drop in for a coffee, a chat, and be able to experience all the great gear from API, including our own fully-operational 1608 console.”

Studio Connection’s longstanding association with the finest audio manufacturers highlights their commitment to the Australian pro audio market. Working closely with their network of dealers, the staff at Studio Connections pride themselves on customer service and are eager to expand the API presence in Australia. “We have witnessed an unprecedented level of interest in API products from our dealers and end users alike,” said Sloss. “API carries a rich heritage of extremely high-quality audio products and consoles. It’s been extremely gratifying to receive such wonderful support and endorsement from this appointment.”

ABOUT API (AUTOMATED PROCESSES, INC.) Established more than 40 years ago, Automated Processes, Inc. is the leader in analog recording gear with the Vision, Legacy Series and 1608 recording consoles, as well as its classic line of modular signal processing equipment.

www.apiaudio.com

SYMETRIX SYMNET RADIUS 12X8 DANTE NETWORKED AUDIO DSP DELIVERS PRESENT AND FUTURE AUDIO EXPANSION FOR WISCONSIN HIGH SCHOOL

JACKSON, WISCONSIN: Kettle Moraine Lutheran High School serves over four hundred students from in and around Jackson, Wisconsin, a town 45-minutes northwest of Milwaukee. In the last decade, the school has expanded its facilities, and the crowning jewel of that expansion is the 750-seat Performing Arts Center. The center includes facilities for the school’s choirs, bands, and theatrical productions, as well as a state-of-the-art venue for Kettle Moraine Lutheran High School and other area schools and artistic organizations. Because funds were limited, the school asked Professional Audio Designs of Wauwatosa, Wisconsin to build a cost-effective sound reinforcement system that could start with simple coverage for Sunday services and have the ability to scale up to handle full theatrical productions as the funds became available. To accommodate that challenging request, Professional Audio Designs built the system around the Symetrix SymNet Radius 12×8 Dante Network Audio DSP.

“At the outset, the money allocated to the sound reinforcement system was generous, but the building itself ran way over budget,” explained Kim Leonard, president of Professional Audio Designs. “They came back to us and asked us to pare down the sound reinforcement system initially, while at the same time laying the foundation for the more expansive system that they will eventually have. That future vision includes a full-sized mixing console, dozens of mics and inputs, and a full stage monitoring system. But for now, they have a modest four microphones and a line-level input. We’re using the SymNet Radius 12×8 to auto-mix them.”

With the core system now in place, Fulcrum Acoustics loudspeakers powered by QSC amplifiers provide high-impact, high-fidelity coverage of the auditorium’s seating area. Three Symetrix Radius 12x8s provide the modest processing needed for basic sound reinforcement and will go on to provide the more advanced processing necessary. A Symetrix ARC-2e wall panel remote control gives users simple and intuitive control of volume for all four microphones, volume control for the line level input, and an overall master volume control.

When they get the funds, the school can simply plug in the digital mixer, the assisted listening system (ALS is installed now), the online streaming system, and a back stage monitoring system. Additional Symetrix ARC-2e units in the control room, in the house, and on a future portable backstage paging rack complete the system. Importantly, the simple quick-mix system that is already in place is selectable from the main ARC-2e so that the school and church can hold simple events and services without requiring an audio technician on hand.

“The whole system is networked via Dante,” said Leonard. “We built a primary network and a secondary network for backup. We’re glad Symetrix is leading the charge with fully-integrated Dante technology. It’s extremely cost-effective and robust and the fidelity is excellent. In addition, we always use Symetrix with Fulcrum loudspeakers because the FIR filters required by Fulcrum are fully supported within the SymNet software.”

ABOUT SYMETRIX Symetrix is dedicated to making life sound better. As a world leader in the development and manufacturing of digital audio signal processing (DSP) systems and accessories, Symetrix provides best in class audio management solutions to businesses, schools, non-profits and government organizations.

For more information on Symetrix products visit www.symetrix.co

SYMETRIX SYMNET EDGE AND RADIUS DSPs HANDLE PERFORMING ARTS CENTERS IN HOUSTON’S KATY SCHOOL DISTRICT

HOUSTON, TEXAS: The rapidly growing Katy Independent School District serves over 65,000 students in the greater Houston area. To meet their growing audio and visual media demands, school officials recently earmarked funds to update the performing arts center A/V systems in four of its seven high schools. Broadcast Works of Tyler, Texas was contracted to do the installation and used SymNet Edge and Radius AEC open architecture Dante network audio DSPs.

“The old A/V systems were 1990s vintage and entirely analog,” explained Aaron Comer, project manager with Broadcast Works. “The system designer, Erich Friend of Teqniqal Systems assessed their existing systems and determined that they could transform the performing arts centers from outdated to cutting-edge by revamping only the front end and control systems. The existing QSC amplifiers and Renkus-Heinz loudspeakers were basically in excellent shape.”

Although the original design called for another DSP manufacturer, Comer and his team lobbied hard for SymNet Edge and Radius DSP. “We had worked with this other manufacturer’s products in the past, and it was always a challenge,” he said. “In contrast, we’ve done a lot of Symetrix jobs, and they always go well. Ryan Curtright, Symetrix’ senior technical sales engineer, worked with us to put a nice package together centered on SymNet solutions. Based on our past experience, we knew it would work well and reliably… and would save the district some money.” The new systems make use of the Dante network’s stability and flexibility to send signal long distances without copper and provide digital patch bays that allow users (including first-year students) to select among each stage’s 70+ inputs for allocation to a 48-channel Avid SC48 console.

Stage inputs include a multitude of wired input plates together with a portable rack feeding a SymNet Edge and SymNet xIn12 expander. Rather than home running all of the stage inputs back to the sound booth, as in the old design, the new system uses a stage-located SymNet Radius AEC to collect them for transfer to the sound booth via Dante. That same Radius AEC, together with a SymNet xOut12 expander, receives the final house mix from the sound booth (again via Dante) for output to the stage-located amp rack. The portable SymNet Edge rack pairs up with a sixteen-count wireless microphone system or an additional twelve-count hardwired microphone collection and can connect to the system via any one of four Dante ports located around the stage.

Each sound booth contains three SymNet Radius AEC units with additional input cards, three SymNet xIn12s, and three SymNet xOut12s. Broadcast Works designed a custom computer interface using Symetrix’ SymVue software that allows users to connect any input source to any channel on the Avid SC48 console. In turn, the console outputs thirty-two channels that feed back into the SymNet system for transfer to the amp rack via Dante. “The students love it,” said Comer. “We trained a group of freshmen who had zero experience with a system like this. Within a couple of hours, they were completely comfortable and playing with the whole thing. Despite its complexity from our perspective, SymVue makes it simple from their perspective. They get it.”

For less elaborate events, Broadcast Works gave each school an iPad outfitted with Crestron control that would allow them to turn the system on with a minimal number of commonly-used microphones and input sources. The iPad gives them control over which commonly-used inputs are active, their individual volumes, and the overall volume.

The new systems’ easy learning curve made it possible for the theater and music departments in all four schools to start production on fall programs without delay. A few of the highlights include The Wizard of Oz, a Masquerade Serenade concert, and a play called The Cherry Orchard.

ABOUT SYMETRIX Symetrix is dedicated to making life sound better. As a world leader in the development and manufacturing of digital audio signal processing (DSP) systems and accessories, Symetrix provides best in class audio management solutions to businesses, schools, non-profits and government organizations.

For more information on Symetrix products visit www.symetrix.co

DANLEY SOUND LABS LOUDSPEAKERS AND SUBS CONTRIBUTE TO TRUE STEREO IMAGING AT FIRST FREE CHURCH

ROCKFORD, ILLINOIS: First Free Church has been a cornerstone of spiritual life in Rockford, Illinois since 1884. Over the decades, First Free has occupied several buildings of ever-growing size and, since the advent of A/V technology, ever-growing technical sophistication. Its current sanctuary seats close to 1,800 congregants in an arc spanning nearly 180 degrees, with a balcony and under-balcony area that stretches from wall to wall. Tired of poor coverage from a faux-LCR system of mid-1990s vintage, First Free hired SVL Productions of nearby Cherry Valley, Illinois to build a new system that would provide nearly every seat with crisp stereo imaging. Of course, this would be no small feat to achieve. SVL Productions turned to Chicago-based Johnson AV Engineering to help design and commission the new system, which relies on the tight pattern control of Danley Sound Labs loudspeakers to meet – and then greatly exceed – the church’s expectations.

“Music is a vital component of First Free’s services,” said Aaron Johnson, president and principle engineer at Johnson AV Engineering. “The old system had three clusters to cover different wedges of the room’s wide arc, but despite the fact that they were set up as a Left-Center-Right system, none of the seats had any true imaging to speak of. The church wanted true imaging, where each instrument seems to emanate from the empty space between the loudspeakers, but that’s very hard to achieve in such a wide arc. You can’t simply place a couple of clusters on either side of the stage and expect even coverage and convincing imaging. The relative volume and time delay of each loudspeaker at the listener’s location have to be nearly equal to make the stereo effect work.”

The solution was to divide the room into three 60-degree wedges, each of which would receive its own stereo image. Although that’s easy to conceptualize, it’s very difficult to actually implement because almost all loudspeakers spill energy “off-axis.” That spillover would cross the dividing line between one wedge and the next and destroy the stereo imaging effect. “Danley’s tight pattern control made it the obvious choice for this application,” said Johnson. “No other loudspeaker manufacturer comes close to Danley’s razor-sharp pattern control, which extends even to lower frequencies.”

Because of their specific coverage patterns and the geometry of the room, Johnson specified a Danley SH-60 on top of a Danley SM-96 at each loudspeaker location for coverage of the main seating area. A total of six such clusters comprise the main system: three sets of left and right. Four monophonic Danley SH-Micros provide front fill for seats very near the stage. Partitions separate six under-balcony areas, four of which seat thirty to forty each and two of which seat only eight. For the larger partitions, a stereo pair of Danley SH-Micros deliver convincing stereo imaging, whereas a single Danley SH-Micro in each of the smaller partitions deliver a monophonic summed signal.

“I don’t know of another loudspeaker that can achieve the kind of pattern control that Danley has managed,” said Brent Hayes, president of SVL Productions. “Aaron and I walked the room during commissioning, and it was truly astounding to step just past the edge of one loudspeaker’s pattern. It fell off immediately. One more step and we were clearly into the pattern of the next loudspeaker. I remember seeing it on paper, but it’s a whole other thing to experience it.” Johnson agreed: “I love that Danley products always model exactly like they work, and they work exactly as you expect them to.”

But the miracles of great pattern control don’t stop with the loudspeakers at First Free Church. Johnson designed a directional subwoofer cluster comprised of three Danley TH-118s flown near the ceiling, just in front of the stage. By paying careful attention to each unit’s phase and signal delay, the bass volume on stage is a full 18 dB lower than it is in the seats, which is an obvious and significant difference. The dividing line is, in Johnson’s words, “like a curtain,” and even the first row of seats is fully immersed in bass. By keeping so much low-frequency energy off the stage, the sound quality captured on stage by open microphones is much better and far less likely to growl or feed back.

Processing support for the new system is extensive, as proper alignment required a separate processing channel for almost every individual loudspeaker and subwoofer. BiAmp Audia provides that fine-scale level of control. Because the Danley loudspeakers and subwoofers require only a single amplifier channel, the total number of amplifiers was kept to a minimum, but the sheer number of loudspeakers and subwoofers involved still amounted to an impressive 26 channels. Powersoft K-Series and Ottocanali-Series amplifiers provide that power. “The new system requires more power to the loudspeakers and subs than the old system did, but the efficiency of the Powersoft units allow us to draw less AC power!” said Hayes. “As a result, we didn’t have to call in an electrician. Moreover, their physical compactness left an entire rack from the previous installation wide open. In summary, we had more processing channels, more amplifier channels, and more loudspeaker power, but less current draw and less space consumed.”

New video projectors and screens, together with a new high-end Chauvet lekos and LED lights completed the installation.

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology.

www.danleysoundlabs.com

NOW YOU CAN MIX IN THE BOX

JESSUP, MARYLAND – OCTOBER 2013: Automated Processes Inc. (API) takes great pleasure in announcing the latest addition to its line of highly acclaimed analog consoles: THE BOX® project console. THE BOX is specifically designed for audio professionals with project or home studios who require a smaller format console with that “big console sound.” True to its heritage, THE BOX features the same circuitry, performance and legendary API sound as the company’s highly successful Vision, Legacy Plus and 1608 consoles. The new console debuted to a highly enthusiastic AES show in New York, and is now shipping from the company’s factory in Jessup, Maryland.

“THE BOX offers an easy, turnkey solution for recording and mixing,” said API President Larry Droppa. “It’s a great option for people who record a few channels at a time, but demand the warmth and punch that a large API console delivers. In addition to four inputs, full center section control, and 16 channels of API’s famous summing, the icing on the cake is a classic API stereo compressor on the program bus. Now you can truly record and mix… in THE BOX.”

ABOUT API (AUTOMATED PROCESSES, INC.) Established more than 40 years ago, Automated Processes, Inc. is the leader in analog recording gear with the Vision, Legacy Series and 1608 recording consoles, as well as its classic line of modular signal processing equipment.

www.apiaudio.com

New ICE Cable Systems HDMI Features Compact Head Design with GRIP Technology; Handles 15-lbs. of Pull-Force and Transmits 1080P/60 HZ Signals up to 100 feet without use of Baluns

Los Angeles, CA – ICE Cable Systems is shipping its new and improved Clear Series 2 HDMI Cables. Key features of the series include a compact head design, GRIP connector with locking technology and the ability to handle 1080P/60 HZ up to 100 feet (30 meters) without baluns. The line is comprised of pre-terminated cables in lengths from .5 meter to 30 meters and replaces the company’s original Clear Series.

ICE Cable’s unique GRIP connector attaches to female HDMI connectors with up to 15 lbs of pull-force, thus helping reduce disconnected cables and frivolous service calls. The compact size of the head (measures 10 MM by 19 MM by 21MM) contributes to easier side-by-side and stacking connections and takes up less space behind equipment.

In addition to an active chip set, proprietary cable technology allows the Clear Series 2 to achieve 1080P/60 HZ in runs up to 100 feet without the use of a balun, ideal for direct connections from Blu-ray DVD players and DVRs to the TV.

”Clear Series 2 is a game changer because it’s comprised of all the improvements that an integrator could want,” says ICE Cable Systems President Brian Rizzo. “With innovations in three key areas, this is a wish-list of HDMI cable technology at extremely-competitive prices.”

ICE Cable Systems has 41 active distributors in the US selling its products. Integrators can locate distributors in their area by visiting http://www.icecable.com/where-to-buy/ or by calling ICE Cable Systems at 310.444.1950.

About ICE Cable Systems: Founded in 2004 by president Brian Rizzo, ICE Cable Systems is a leading manufacturer of premium low-voltage wire and cable products serving the Audio Video, Alarm and Security, Commercial, Electrical Contracting and Data Center channels. The company’s products are available to integrators both directly and through more than 50 distributors in North America and internationally. ICE Cable’s success is driven by ingenuity and its desire to make superior products that offer more value to installers. www.icecable.com

HISTORIC GIBSON’S BOOKSTORE EXPANDS USING AN ASHLY NE8250.70PEM PROCESSOR/AMPLIFIER FOR DIVERSITY OF PLANNED EVENTS

CONCORD, NEW HAMPSHIRE – OCTOBER 2013: Gibson’s Bookstore opened in Concord in 1898 and has been a cornerstone of the community’s cultural and intellectual milieu ever since. Seizing on the revitalization of the city’s historic downtown, owner Michael Herrmann recently moved the bookstore down the street to the first floor of a brand new five-story office building. At 10,000 square-feet, the move more than doubled Gibson’s floor space and incorporated the newly-acquired Imagination Village educational toy store. The fact that it was new construction gave Herrmann the opportunity to design the store to his exact specifications. Included within those specifications is a sophisticated sound reinforcement system that will gracefully accommodate events of varying sizes and styles. A single, two-rack space Ashly ne8250.70pem eight-channel 250W network amplifier with an on-board Protea™ DSP processor is paired with four Ashly neWR-5 wall-mounted remote controls to form the cost-effective heart of the new location’s flexible, easy-to-use sound system. Factory-installed microphone preamp inputs complete the amplifier package.

“The old location was small enough that a simple, consumer-type sound system could do the job,” explained Rick Elliott, production manager at MFI Productions, the firm that designed and installed the new sound system at Gibson’s Bookstore. “When the owner was looking over the plans with designer Kat Whouley of Books In Common, he realized it would take something more high-tech to do it right. He wanted the flexibility to accommodate any type of event, but he also wanted to make sure that his staff could operate the system intuitively.” Herrmann stopped in at Concord’s Capitol Center for the Arts (literally right across the street from the new location) for recommendations, which led him to MFI Productions. The firm worked with Herrmann for an entire year to ensure that the sound system they installed would be right in every respect from the beginning. After all, they had the opportunity to install it while the building-to-be was still nothing more than steel and concrete.

As the design evolved, the number of zones grew from just a few to eight. Separate Pandora music boxes allow different content to play in the children’s section, the main floor, the café, and the on-hold phone system. A handful of line and microphone inputs accommodate a simple acoustic music setup, a presentation, or a lecture. Two outdoor speakers handle the café’s outdoor seating area, while Twenty-four Electro-Voice Evid C8.2 coaxial ceiling speakers cover the bookstore and are zoned so that speakers can be either muted or used for events of various sizes in either the children’s section or the main section. Since it was easy to install during construction, Elliott ran a few extra input lines that the store can grow into if needed. Four Ashly neWR-5 network wall-mounted remote controls placed at strategic locations allow staff to intuitively select zone inputs and control the volume in each zone.

A single, two-rack space Ashly ne8250.70pem provides all of the necessary microphone preamplifiers, input processing, I/O matrixing, and loudspeaker processing, along with eight channels of amplification at 250W per channel into 70V. “The Ashly ne8250.70pem was the right solution because of its simplicity and flexibility,” said Elliott. “It could do everything that the expanded Gibson’s would require, and, when paired with four Ashly neWR-5 wall-mounted remote controls, could deliver that functionality in a way that would be transparent for the staff. When you consider that the two-rack space ne8250.70pem is handling all of the processing and amplification for the entire store, its cost is more than fair.” To help with the evolving system use, the IT contractor allowed Elliott to get through the bookstore’s firewall so that he can make adjustments to the ne8250.70pem from anywhere in the world.

ABOUT ASHLY AUDIO Ashly Audio Inc. is recognized as a world leader in the design and manufacturing of high quality & high performance signal processing equipment and power amplification for use in the commercial sound contracting and professional audio markets. The 37-year old company is headquartered in Webster, New York U.S.A. www.ashly.com

DANLEY TH-812 “ROCK MONSTER” SUBS SHAKE BIG-10 FOOTBALL FANS IN ILLINOIS AND WISCONSIN

CHAMPAGNE, ILLINOIS/MADISON, WISCONSIN – OCTOBER 2013: The University of Illinois’ 60,000-seat Memorial Stadium and the University of Wisconsin’s 80,000-seat Camp Randall Stadium each received a huge new Daktronics video board in time for the 2013-2014 season. At 3,500 and 4,200 square feet, respectively, the new boards dwarf their predecessors in both size and quality. With them came new Daktronics-designed and installed sound reinforcement systems, each with abundant musical low-end supplied by four giant Danley TH-812 “Rock Monster” subwoofers. For the throngs of ardent Illini and Badger fans that pack the historic stadiums on game day, the powerful low-end inspires new levels of enthusiasm!

At four hundred and counting, South Dakota-based Daktronics has installed more sound reinforcement systems in large sports venues than any other company in the U.S. “Our clients never ask for more high end,” laughed John Olsen, a Daktronics regional sales representative with a focus on large sports venues. “And when it comes to low end, no one ever complains that there’s too much! With the program material that is being played by students these days, thunderous low end has become an essential component of the game day experience. Danley provides a clean and punchy low end that we like better than most other manufacturers.” Daktronics has a complete in-house design team that includes system design engineers, electrical engineers, mechanical engineers, structural engineers, marketing experts, project managers, field installation engineers, and site supervisors. “It’s a big team that, together, builds very engaging sound solutions for our customers and their fans,” said Olsen.

Both new systems use JBL VLA line arrays for full-range content. A BSS Hi-Q Network and Crown amplifiers provide processing and power at Illinois, and a QSC Q-Sys Network and QSC amplifiers do the same at Wisconsin. Each stadium’s complement of four Danley TH-812s hang from its new scoreboard and provide, in Olsen’s words, “seat-shaking bass” fifty feet off grade at Illinois and one hundred feet at Wisconsin, using 128,000 watts of power. “Our design team keeps specifying Danley’s Rock Monster because it gives our clients a rich low-frequency response that extends below that of most normal subwoofers.”

Olsen continued, “When a client’s new system is operational, it’s always a great day. And when we bring the subs into the mix, the usual reaction is stunned silence and big smiles. The contrast is stark: they had been using a system with only partial low-frequency response that had reached the end of its life. Moving to a new system with the kind of deep low-frequency response that the Danley TH-812s deliver really puts an exclamation point on the new experience!”

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology. www.danleysoundlabs.com

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

July 2014
M T W T F S S
« Jun    
 123456
78910111213
14151617181920
21222324252627
28293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication