A virtual press conference from Sound & Video Contractor

Archive of the Worship Facilities Expo Newslink Category

St. John Church Gains Intelligibility with New Sound System

Completed in 1837, St. John the Evangelist is a historic Catholic Church in Frederick, Maryland with a Grecian ionic design and a cruciform floor plan. The church has carpeted floors but its spacious marble and plaster interior and hardwood pews create major challenges for voice intelligibility.

St. John’s existing sound system had poor intelligibility and coverage and a recurring feedback issue. In 2011, Eric Johnson of Audio Video Group offered St. John’s a new system using Community’s ENTASYS column line-source loudspeaker system. Johnson performed a live demonstration that showed his design could provide intelligible sound with even coverage while minimizing audio feedback.

St. John’s new system has an ENTASYS ENT-FR full-range column and an ENT-LF low-frequency column on each side of the chancel tilted slightly downwards to avoid rear-wall echoes.

The left and right transepts and the rear of the church are covered by ENT206s. A pair of ENT203s provides coverage for the balcony and choir loft. Johnson used an Earthworks gooseneck mic on the ambo and lectern and provided Shure wireless mics for the priests. St. John’s system uses a Biamp AUDIA FLEX for automatic mixing, loudspeaker delay and system equalization and Lab Gruppen power amplifiers. A small mixer in the balcony blends choir soloists and guitars into the service.

St. John’s is very pleased with their new system’s intelligibility and coverage and its lack of feedback. Soon after the system was installed, a senior gentleman attending Mass asked the priest to please not change anything because this was the first time in a long time that he could clearly hear what was being said!

NEW DANLEY DIRECT FREE MODELING SOFTWARE DELIVERS SPEED, CROSS-PLATFORM PERFORMANCE, SOLID MATH, AND THIRD-PARTY MEASURED DATA

GAINESVILLE, GEORGIA – JULY 2014: Danley Sound Labs, maker of innovative loudspeakers and subwoofers that cleverly sidestep the trade-offs and constraints inherent in conventional designs, has applied that same “outside of the box” thinking to its latest loudspeaker and subwoofer installation design software. Named Danley Direct and available for free from danleysoundlabs.com, the new platform models the direct sound path from user-defined designs involving Danley products in three-dimensional spaces (which can be conveniently imported or modeled via SketchUp). Co-designed by renowned acoustician Doug Jones and Sebastian Rivas Godoy, Danley Direct is notable for its transparent cross-platform performance (Mac or PC), multiple-window flexibility, and tremendous speed. Like everything Danley Sound Labs puts its name on, Danley Direct is built on solid math and third-party measured loudspeaker and subwoofer data.

Danley Direct is heir to the capabilities of Danley’s DDT modeling software, which was one of the only loudspeaker modeling software programs to include subwoofer (i.e. < 100Hz) output. "When we were asked by Mike Hedden, Danley president, to update DDT, Sebastian and I realized that it had fully matured," said Jones. "It would become unwieldy if we tried to build more capability on top of its existing structure. So we decided to start from scratch. We recognized that our new software had to be fast, and it had to let the user create his or her own work environment. It needed a powerful graphics engine that could keep pace with a quick-thinking designer."

Jones and Godoy succeeded. Not only will Danley Direct operate on a Mac or PC with interchangeable files, it will do so with a fluidity that encourages exploration and creativity. The software supports multiple-window operation, and rendered objects can be rotated and otherwise manipulated without requiring re-rendering. "No other loudspeaker modeling software can do that," stated Hedden. Jones added, "With that kind of speed and transparency, Danley Direct is not going to waste anybody's time." Because it uses the ubiquitous SketchUp as its drawing environment, it's easy to create spaces either from scratch or by importing the numerous file types that SketchUp accepts (e.g. .dxf, AutoCAD). Of course, Danley Direct can import Danley DDT files, and, like DDT, Direct training will count toward CTS continuing education credits.

Although not nearly as flashy as its smooth graphics engine or its transparent workflow, Danley Direct's underlying mathematics and the Danley product data that feed into it are honest and correct. That, of course, is of the utmost importance. "Danley has always supported third-party independent measurements," said Jones. "The model you build in Danley Direct will be as close to the reality of the subsequent installation as any reasonable person could expect. This software is not designed to sell Danley products; it is designed to properly model them so that our users will have successful projects. And that is what will sell Danley products."

ABOUT DANLEY SOUND LABS Danley Sound Labs is the exclusive home of Tom Danley, one of the most innovative loudspeaker designers in the industry today and recognized worldwide as a pioneer for “outside the box” thinking in professional audio technology.

www.danleysoundlabs.com

Grove City Church of the Nazarene Upgrades to New Yamaha Digital System

BUENA PARK, Calif.—The Naz Church in Grove City, Ohio main auditorium seats approximately 2,800 people and has a congregation of 3,000. The church recently installed two Yamaha CL Series Digital Audio Consoles (a CL5 at front of house and a CL1 at monitors), eight Rio input/output boxes: two Rio3224-D, two Rio1608-D, two Ri8s, and two Ro8s. The system was purchased through Boynton Pro Audio (Norwich, NY) and installed by church staff and volunteers.

“This was not our first experience with digital consoles,” states Matt Groves, Technical Director at The Naz. “We previously used a Yamaha LS9 at monitors and a Yamaha PM1D at front of house. The purchase of the CL system began when we started looking for a replacement monitor console because our Yamaha LS9 was stolen from the monitor booth. One of our front of house engineers, Doug McLaughlin with Tech Art Productions in Columbus, suggested we purchase a CL Series, and after researching it more, we discovered how functional it would be for us. Our audio engineers are volunteers with previous digital console experience on our LS9 and PM1D, so the only training required was to watch the self-training videos on the Yamaha website. The set up and operation of the CL system was very user-friendly.”

The Church of the Nazarene has both traditional and contemporary services. The traditional service consists of an 80-member choir, a 15-piece orchestra, a rhythm section (with a five- piece drum kit, two digital keyboards, bass, two acoustic guitars, one electric guitar, synth/tracks), and seven main vocalists. The contemporary service consists of a five-piece drum kit, digital keyboard, bass, acoustic guitar, two electric guitars, synth/tracks, and four vocalists.

“Because of the many components each service style presents, we felt it was a good opportunity to start our CL system upgrade,” Groves said. “We decided to purchase a CL1 with a Rio3224-D first to replace the monitor console, and our master plan was to eventually purchase a CL5 for front of house. A couple of weeks after installing the CL1, we began having major issues and failures with our then existing analog wiring and patch bays, so we decided to accelerate the completion of our system and purchased the CL5 along with the seven additional Rio boxes.”

Groves said the features that determined the church selection of the CL Series was the Dante networking and the ability to bypass their old/existing wiring. “The use of the Dante system is so functional for us as a church,” he says. “Since we run two very different style worship services and host many events and concerts throughout the year, having the Dante network gives us the flexibility we need. We also needed to replace the existing wiring and patch bays so being able to run a redundant network with Cat5e cable between the consoles and Rio boxes was a huge cost savings for us. Our system now sounds the cleanest it has ever sounded.”

The Naz also upgraded part of their video system infrastructure using Ross Video’s Carbonite 2M 24 Switcher MultiMedia Edition. The video control room is home to the switcher along with two 60″ Panasonic plasma displays for multi-viewer use with the Carbonite, along with three 24″ LCD displays for preview use. The church staff records to two solid-state hard drives using Blackmagic’s Hyperdeck Studio Pro. Four Mac Pro’s are used for video playback, lyric projection, and live streaming of services, using Livestream as their streaming service provider.

“We currently run five cameras,” Groves notes, “however, these are still our older cameras (three Sony D-30′s and two Canon XH-A1’s). Right now we are meshing our standard definition cameras with the high definition infrastructure, which took some doing, but works great now after some trial and error and many converters.”

With regard to the new Yamaha system, Groves said the system has unbelievable clarity. “It’s amazing when you have the system on and can’t tell it’s on. Before the installation, our system was pretty noisy from the analog wiring and patch bays, but now there is no noise at all. The clarity and depth of sound we’re getting from this system is amazing!”

For more information on The Naz, visit www.thenaz.tv.

For more information on Yamaha CL Digital Audio Consoles, visit www.yamahaca.com.

-END-

About Yamaha Commercial Audio Systems, Inc.:
Yamaha Commercial Audio Systems, Inc. (YCAS) provides a full line of integrated professional audio products offering complete systems solutions for the broadcast, sound reinforcement/installed sound, touring, commercial recording, and post production markets. With the addition of NEXO to the product line, the company remains the official U.S. and Canadian distributor for all NEXO speaker models. YCAS offers comprehensive in-house and field product training for its customers, a dedicated dealer network, and 24/7 technical support.

Zeo Systems Integrations Launches New Web Site

FOR IMMEDIATE RELEASE

June 30, 2014

 

Zeo Systems Announces New Web Site

 

Hatboro,PA-

The Zeo Group, headquartered in Hatboro, PA.in the northern suburbs of Philadelphia, have partnered with local web design and marketing firm, IQnection to begin a total redesign and launch of the web sites for each of their distinct divisions. The first of these projects is the launch of the site for Zeo Systems, the installation and integrations division of the company. This site is located at www.zeo-systems.com. This launch is just the beginning of the exciting changes happening at Zeo. The launch coincides with Zeo’s purchase of the industrial park in which they are headquartered. Construction and expansion plans are on the immediate horizon so the homes of the different divisions will soon take on their own unique look and feel.

ASHLY AUDIO PROCESSING AND USER CONTROL STREAMLINES NEW MICHIGAN FUNERAL HOME

HOMER, MICHIGAN: Long established in Michigan, the Craig K. Kempf Funeral Home recently expanded to Homer, Michigan, where it purchased a small funeral home. Kempf immediately brought in contractors to revitalize the existing structure, which itself had originally been a residential house, and ordered an expansion to provide a modestly larger chapel than the existing 30’ x 15’ room. Local A/V firm Crookston Audio designed and installed a new sound reinforcement system for the new chapel and for the remodeled rooms. Based on its simplicity of installation, competitive pricing, and intuitive user interfaces, company president John Crookston specified an Ashly Pema 4125.70 integrated processor & four-channel amplifier together with Ashly RD-8C and WR-2 user controls.

“They originally asked for two zones, one for the new chapel and one for the existing chapel, the lobby, and the fellowship hall combined,” explained Crookston. “They wanted the ability to reinforce a small keyboard, a soloist, audio from DVD or CD, plus, of course, the spoken word from the person officiating the funeral or delivering a eulogy. Those inputs would be reinforced within the new chapel, and they would also be sent to the old chapel and the fellowship hall, which could serve as cry rooms or overflow. We explained that using four zones, one for each room, would give them greater flexibility, with the promise that using the system would be so intuitive that staff would be able to confidently negotiate source selection and volume control with little or no training.”

A two-rack space, four-channel Ashly Pema 4125.70 resides at the heart of the system and delivers 125 watts to each of the four 70-volt systems. The new chapel, which is still a modest 25’ x 35’, has four mic-level inputs, enough for soloists, vocalists, and spoken word. The audio system also takes input from the room’s CD and video sources. A single Community V2-28 two-way loudspeaker provides coverage in the new chapel, whereas Community D5 ceiling speakers provide coverage in the old chapel, the lobby, and the fellowship hall.

User control consists of two complementary controls. First, an Ashly RD-8C remote desktop fader bank allows anyone to sit within the new chapel and mix the input sources in real time. A single cable ties the RD-8C to the Pema 4125.70, which allows the operator to sit anywhere in the new chapel and discretely mix. Second, an Ashly WR-2 resides near the equipment rack and allows staff to send audio from the new chapel to any (or none) of the other rooms.

“As a contractor, I not only have to deliver a great final product, I also have to make money doing it,” Crookston laughed. “Ashly is a great help with that! Ashly equipment is totally reliable. We’ve been using it for years and never had a problem. Moreover, Ashly’s Protea™ signal processing software is common to the entire Ashly line. So my staff can learn Protea, which is quite intuitive, and then install any Ashly product in any size system. There’s no learning curve. As a result, all of our installations are predictable and as easy as they can be, which is the way I like it.”

ABOUT ASHLY AUDIO Ashly Audio Inc. is recognized as a world leader in the design and manufacturing of high quality & high performance signal processing equipment and power amplification for use in the commercial sound contracting and professional audio markets. The 40-year old company is headquartered in Webster, New York U.S.A. www.ashly.com

FSR President Jan Sandri Honored at InfoComm14

Sandri Receives a Women in AV Award from InfoComm International®

Las Vegas, NV – InfoComm14 — FSR President Jan Sandri’s exemplary career, generous spirit and commitment to community were recognized by InfoComm International®, the leading professional audiovisual trade association, when they presented her with an InfoComm Women in AV Award. Sandri accepted the honor at the organization’s 75th Anniversary Awards Dinner held at the LVH in Las Vegas, Nevada on the eve InfoComm 2014, the top annual commercial audiovisual trade show. InfoComm is taking place June 14-20 at the Las Vegas Convention Center in Las Vegas, NV.
The Women in AV Award was created by InfoComm to raise awareness of the growing role of female professionals in the male-dominated field of audiovisual technology. The award winners are in the upper echelon of AV professionals and symbolize the strength of entrepreneurship and excellence in developing tomorrow’s AV talent.
Sandri’s career, and life, ticked all the qualification boxes. Sandri, who is a founding member of FSR, a well-known manufacturer of a wide variety of AV products, has built her career with a commitment to her company, industry, community and country. With over 33 years experience in the AV industry, Sandri’s significant contributions extend from developing products that answer a real need, to having served as a director on the Board of several industry organizations. And after more than three decades of service, Sandri has grown FSR, a women owned business that strives to maintain green manufacturing processes, from three people to a staff of over 100.
Cory Schaeffer, a co-founder of Listen Technologies, was also presented an award. “Both Jan Sandri and Cory Schaeffer have demonstrated extraordinary levels of professional knowledge, while taking time to improve the industry and better the lives of others,” said David Labuskes, CTS, RCDD, Executive Director and CEO, InfoComm International. “InfoComm is pleased to celebrate Cory and Jan’s achievements.”
Sandri’s sense of responsibility extends to civic activities where she has served as the mayor of Little Falls, NJ, her home town, and well as on the town council, did a stint as fire commissioner, police commissioner and was also the president of the board of health. As mayor she donated her salary to local worthy causes, or to needy people, and every fall, as school opens, Sandri leads the charge to work with United Way and donate supplies, such as backpacks and notebooks, to children whose families are having a difficult time keeping up with the economy.

“I am deeply honored to be recognized by InfoComm, an organization of which I am proud to be a member,” Sandri stated. “I am lucky to be surrounded by so many wonderfully talented, smart and generous women, and men, in the AV industry who prove everyday that everyone is capable of helping others to effect change, whether it be in business or community.”

See InfoComm’s announcement: http://www.infocommshow.org/2042.asp

About FSR
FSR, established in 1981, manufactures a wide variety of signal management and infrastructure solutions for the audio / video, datacom, education, hospitality, government, and religious markets, including floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and HDBaseT & CAT-X signal delivery solutions.

The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com.

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • mailto:harriet@desertmoon.tv

Screen Innovations Creates New In-wall Screen Category

Austin, TX—June 2014—Screen Innovations (SI), the fastest growing technology-based screen manufacturer in the USA—and the undisputed world leader in ambient-light-rejection screen technology—has developed an exciting new in-wall installation option for its FlexGlass™ rear projection screen material.

FlexGlass™ In-wall is a revolutionary new option that integrates a screen into a wall for a flush fit and finish.

FlexGlass™ is the world’s first rollable glass projection screen with curve and custom capabilities ideal for commercial and retail installations. With FlexGlass™ In-wall, the screen is material inserted into a rigid frame at the job site, then mounted in a pre-cut opening. SI provides integrators with a template and step-by-step instructions to cut a precise opening in the wall.

FlexGlass™ Rear-Pro projection screen material is the most innovative breakthrough in rear projection screens in decades. For the first time, a screen has broken the physical barriers that limit all other rear projection screens. It does so by delivering unmatched edge-blend capability, zero hotspotting, almost infinitely variable viewing angle, and dark contrast because of its ability to reject ambient light.

FlexGlass™ is made from the same material as bulletproof glass, and is available in screens up to 9’ high and 99’ wide, allowing the best in flexibility, strength, and performance. It offers the benefits of the best rigid optical glass and panels, and, because it’s semi-rigid, FlexGlass™ can be used in curved configurations ideal for retail, in-window displays, exhibits, houses of worship, board rooms, corporate lobbies, and more. It can also be rolled in long, seamless sheets on 24” diameter cores, eliminating the logistical problems associated with moving rigid glass or Plexiglas sheets into and through buildings, elevators, and small doorways.

Manufacturers Suggested Retail Pricing: starting at $6,278.00 USD
Availability: June 1, 2014

Screen Innovations makes it easy to choose the right screen for each application, based on lighting, room size, seating distance, and more. Visit www.screeninnovations.com to check out the Screen Calculator, Screen Wizard, and Projector Wizard online tools.

About Screen Innovations
Based in Austin, Texas, Screen Innovations is a leading manufacturer of projection screens and associated technologies for residential and commercial applications. Best known for Black Diamond™, the world’s first and only multi-directional, ambient-light-rejection projection screen technology, SI has effectively revolutionized the two-piece projection category by pioneering and producing screens that deliver an unparalleled video image in light or dark environments. Sold at affordable price points and designed to blend flawlessly with surrounding décor, SI projection screens deliver stunning images and a fully immersive entertainment experience that rivals or surpasses traditional displays. Operating under the principle of “No matter the budget,” Screen Innovations has the best available screen solution to suit your needs.” SI produces a comprehensive assortment of screens and accessories for nearly any budget or application.

Visit www.screeninnovations.com or call 512-832-6939. Follow us on Facebook @screeninnovations and on Twitter @SIScreens.

Symetrix Radius 12×8 Dante™ Network DSPs Help Revitalize St. Peter Catholic Church

OMAHA, NEBRASKA – JUNE 2014: The Diocese of Omaha erected St. Peter Catholic Church in Omaha, Nebraska in 1926, and the church enjoyed many decades at the heart of Omaha’s Catholic community. However, times changed, demographics shifted, and the church didn’t have the funds to keep up with needed maintenance. It fell into disrepair. However, a recent resurgence in attendance inspired by the leadership of Fr. Damien Cook motivated the diocese to fund a major external and internal renovation at St. Peter Catholic Church. Now complete, the renovation, designed and coordinated by Conrad Schmitt Studios of Milwaukee, Wisconsin has won awards and features a new sound reinforcement system anchored by a Symetrix Radius 12×8 Dante network audio DSP system with Symetrix ARC wall panel remote.

“It was a complete overhaul, from the roof to the floors, from the walls to the ceiling, everything is renovated and revitalized,” said Tim Burkhart, senior systems designer with Omaha-based Midwest Sound & Lighting, the firm that installed St. Peter’s new sound reinforcement system. “It’s really stunning. In the process, they knew they would radically alter the room’s acoustics. They wanted to ensure that the new sound system would give them musical impact and intelligibility.”

Milwaukee-based DSH Audio Visions designed the sound system and partnered with Scott Riedel Associates of Milwaukee for acoustic design. David Hosbach, DSH president and principal design consultant concurred with Burkhart, and added, “Father Cook and Music Director Zachary Turner understand that while the music portion of Mass is really important, if worshipers can’t hear the Word clearly the rest of it – the majestic music, the ornate worship space – really doesn’t matter. I take my hat off to them and the St. Peter congregation for allowing the sound design, the room acoustics and the architectural beauty to work together in harmony, so to speak.”

Two Symetrix Radius 12×8 DSPs form the heart of the system. One unit is located at the front of the room, the second unit is located at the back of the room, and they connect via the Dante network. That way, each unit is near to a collection of inputs and appropriate outputs, and because the system integrates completely via Dante, any of those inputs can be sent to any of those outputs. Redundant Dante connections provide a failsafe in case one of the networks goes down – the other network will pick up seamlessly. The Radius units provide sophisticated processing for Crown amplifiers and a Tannoy QFlex 64 steerable line array.

The Radius units are located in a wall rack at the back of the loft and at the main equipment rack in the sacristy at the front of the room. Two remote sets provide user control, with one mounted in the main rack, and the other in the loft in a custom portable box at the organ console. All told, two Symetrix ARC-K1e, five Symetrix ARC-EX4e, and three Symetrix ARC-SW4e wall panel remote control units provide comprehensive, yet intuitive, control of the system. They primarily select active inputs and allow volume adjustment and configuration preset changes. “We use a lot of Symetrix equipment, and we love the hardware, the software, and its bullet-proof reliability,” said Burkhart. “The sound quality is always top-notch, and the Symetrix open-architecture processing is capable of anything we ask of it. Considering how frequently we use Symetrix products, the failure rate is remarkably low. And if something does go wrong, Symetrix makes it right immediately.”

Hosbach commented, “I like the Symetrix SymNet DSPs for the same reasons as Tim. And I’ll add that they are really easy to program, the site files are fast and convenient to move around in and modify on the fly during setup, and the tuning filters are extremely accurate.”

Burkhart concluded, “St. Peter Catholic Church is very happy with the new sound reinforcement system. They are delighted with its sound quality and with its ease of operation.”

ABOUT SYMETRIX Symetrix is dedicated to making life sound better. As a world leader in the development and manufacturing of digital audio signal processing (DSP) systems and accessories, Symetrix provides best in class audio management solutions to businesses, schools, non-profits and government organizations.

For more information on Symetrix products visit www.symetrix.co

BE SURE TO STOP BY AND SEE US AT INFOCOMM BOOTH #C9416

MS2800H/L Digital Signage Appliances Deliver Up to 8K Content to 16 Displays at 1080p per Display

MS2800H/L Digital Signage Appliances Deliver Up to 8K Content to 16 Displays at 1080p per Display

Play and Manage 4K and 8K Content at Native Resolution on Ultra HD Video Ribbons and Walls

InfoComm, Las Vegas, NV & San Jose, CA, – June 18, 2014 – DT Research™, Inc., an industry leader in the development of information appliances for vertical markets, today announced the MS2800H and MS2800L Digital Signage Multi Screen Appliances, the latest in the WebDT Signage System line, capable of powering content on up to 16 screens. The MS2800H/L Multi Screen Appliances enable up to 4K or 8K powerful content seamlessly played across multiple displays (up to 16 from a single appliance), and offer content blending, or tiling, across screens. The MS2800H/L provide a fully integrated system for Ultra High Definition Video playback on up to 16 screens and multi-zone management via WebDT Content Manager 6.1 Pro, the included web-based Content Management System.

Featuring two ultra-powerful Intel® Xeon® v2 processors (E5-2630 for MS2800L and E5-2643 for MS2800H with higher frame rate supported), the MS2800H/L support up to 16 outputs for ultra high resolution video arrays. Each screen displays 1920 x 1080 (Full-HD) resolution and multiple screens can be configured into one canvas or can deliver content to individual screens in different areas of a building. This flexibility simplifies installation in large venues.

The MS2800H/L are complemented by the web-based WebDT Content Manager 6.1 Pro software for intuitive remote management of content and device functions. Bundled with all WebDT signage/multi screen appliances, WebDT Content Manager offers an easy-to-use interface for organizing, scheduling, and distributing content, and supports numerous media formats (e.g., images, videos, Flash, remote URL’s, RSS, executable applications, ZIP, and Microsoft PowerPoint). Flexible screen layout options with multiple zones and layers enable a multi-screen video wall to be divided into multiple areas with different content in each zone to mix images, text, and real-time video through an RTSP or MMS stream, or through an optional video capture card. This management software allows quick updates over a network connection for real-time or scheduled content playback and automatic content download recovery to prevent downtime. The newly released WCM 6.1 Pro now supports a powerful HTML 5 Widget Editor (available for download online), enhanced player management interface, extended browser support, and fully frame-synchronized multi-screen video playback with frame-synchronized audio/video.

The WebDT Signage System offers highly-integrated digital signage hardware with intuitive web-based content management software enabling effective targeted communications. With a range of high-powered appliances for single and multiple screens, the WebDT Signage System delivers dynamic visual messages to optimize customer experience with minimal total cost of ownership and maintenance effort.

To view a full video demonstration, please visit: http://www.signage.dtri.com/products/multi_screen_appliance/ms_video.html
The MS2800H and MS2800L are available now.

About DT Research
DT Research™ develops and manufactures web-enabled information appliances for vertical applications. The WebDT family of products is based on thin computing platforms for secure, reliable, and cost-effective computing. WebDT products include digital signage solutions, wireless tablets, point-of-service handhelds, compact modular systems, and display-integrated information systems. These systems emphasize mobility, wireless connectivity and touch displays WebDT systems offer durability and ease of integration, by delivering solutions that can be remotely managed with the comprehensive WebDT Device Manager software.
For more information, visit http://signage.dtri.com.

DT Research and WebDT are trademarks of DT Research, Inc. All other brands and product names may be trademarks and/or registered trademarks of their respective owners.
###

ASHLY AMPLIFIERS AND SIGNAL PROCESSORS NOW SHIPPING WITH DANTE™

WEBSTER, NEW YORK: Ashly Audio, maker of powerful, high-performance, cost-effective power amplifiers and signal processors, is now shipping Dante digital media networking solution with all their nXe, nXp, Pema and NE Series networkable amplifiers. NE Series rack-mount system processors (4400, 4800, 8800) are also available for purchase with Dante. With low latency, robust synchronization, I/O scalability, and simplicity of installation via standard IT technology, Dante will significantly enhance the power and value of Ashly’s networkable amplifiers line and select signal processors.

“We’re now ready to supply our market with this incredible audio networking technology in our nXe and nXp amplifiers” says Anthony Errigo, director of communications at Ashly. “Dante currently brings the best in flexible, yet robust, digital audio transport and we’re poised to build on its success by delivering this connectivity in our most premier amplifiers and processors. Our customers will benefit greatly by this advancement.”

Audinate revolutionizes the way that A/V systems are connected by transporting high-quality media over standard IT networks. Dante is a robust proven solution which is widely deployed in hotels, transportation centers, shopping centers, public address systems, live sound reinforcement, theaters, concert halls, stadiums, athletic venues, corporate boardrooms, universities, broadcast facilities, recording facilities, houses of worship, government facilities, and courtrooms.

ABOUT ASHLY AUDIO Ashly Audio Inc. is recognized as a world leader in the design and manufacturing of high quality & high performance signal processing equipment and power amplification for use in the commercial sound contracting and professional audio markets. The 40-year old company is headquartered in Webster, New York U.S.A. www.ashly.com

ABOUT AUDINATE Audinate’s patented Dante media networking solution has been adopted by eighty OEM manufacturers in the professional audio/visual industry and is a Promoter Member of the AVnu Alliance™. Audinate offices are located in US, United Kingdom and Australia. Visit www.audinate.com for the latest news and information on the company. Dante is Digital Media Networking Perfected.

Dante is a trademark of Audinate Pty Ltd. Audinate is a registered trademark of Audinate Pty Ltd.

STOP BY AND SEE ASHLY AT INFOCOMM BOOTH #C11308

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

October 2014
M T W T F S S
« Sep    
 12345
6789101112
13141516171819
20212223242526
2728293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication