A virtual press conference from Sound & Video Contractor

Archive of the Switchers Category

Apantac Launches New Extenders and Matrix Switches at ISE 2012

Apantac continues to expands its line of MT HOOD and MAZAMA signal processing and extension solutions and is launching ten new products at ISE, stand 11 N67.

New to the MT HOOD series:
• HDBaseT extender and receiver set with Ethernet and Power over Ethernet (POE)
• 4×4 and an 8×8 HDMI Matrix switch
• Dual Head KVM Extender to extends VGA, USB mouse, and keyboard over two CAT 5e/6 cables
• A USB Touch Screen Extender extends VGA with USB control over a single CAT 5e/6 cable
• VGA Skew Corrector – provides skew delay correction between the Red, Green and Blue VGA signals being transmitted over CAT 5e/6 cable.

New to the MAZAMA Series:
• DVI Fiber Optic fixed cable extender that extends 1080p signals up to 500 meters up to resolutions of 1920×1200
• DVI Dual Link Fiber Optic fixed cable extender that extends Dual Link DVI signals up to 330 meters, using two multi-mode SC fibers
• HDMI Fiber Optic extender that extends 1080p signals up to 500 meters over a single multi-mode SC fiber

Apantac will be at ISE 2012 on stand 11 N67.

FSR Makes Mounting Mics Easy Work With Elegant Table Box

Woodland Park, NJ • FSR’s new T3-MJ+ Table Microphone Box series furnishes an elegant yet simple solution for mounting gooseneck microphones. The stylish, mini table box, available in a variety of models, accommodates a wide range of tables and lecterns for any applications requiring a gooseneck mic, including conference and boardrooms, courtrooms, state houses, pulpits and control rooms. Jan Sandri, FSR president announced today that all the models are in production and are currently shipping.

The T3-MJ+ is available in three finishes – black, brass and aluminum – to fit every décor. The basic model offers improved noise isolation and features a built-in, acoustically isolated microphone connector to accommodate mics with 3-pin XLR plugs of a diameter of 1-inch or less and provides superior shock and vibration damping.

Enhanced units, T3-MJ+1B and T3-MJ+2B, offer one or two additional buttons and are custom assembled with momentary or maintain type switches with a variety of switch caps and bi-color LEDs. T3-MJ+1BM and T3-MJ+2BM models feature an internally pre-wired built in mute feature. All models, except the base unit, provide a screw terminal connection to the mic.

A simple process requiring a 2-inch round hole, and less than 1.5 inches of under table clearance makes easy work of installation. An under table shroud is provided as part of the assembly.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

All FSR products are designed and manufactured in its Woodland Park, NJ facility. The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com.###

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

Vaddio Adds Further Usability to ProductionVIEW HD MV Camera Control Console with Built-In Multiviewer

Vaddio announces new enhancements to the ProductionVIEW HD MV all-in-one camera control console with multiviewer capabilities, digital inputs/outputs, HD, RGBHV and SD video mixing, transitions, lower screen graphics and automated control functionality.

ProductionVIEW-HD-MV

ProductionVIEW-HD-MV


New Multi-View Input Screens allow the user to select between screen layouts that display four, five or six inputs. When set up with four or five preview windows, the preset video thumbnails become larger on the bottom of the screen. In addition, the Preview and Program windows can be swapped on the multiviewer output. With Vaddio’s TeleTouch touch screen monitors, all live video feeds can be selected and up to 12 video thumbnail presets can be created, recalled and stored by simply touching the monitor. The thumbnails are a snapshot of what the camera preset shot looks like, to make storing and recalling presets even easier. Simply touch a thumbnail and the camera will pan, tilt and zoom to that position. The Cut, Wipe and Fade buttons illuminate on the multiviewer display, giving a visual indication of which effect is active.
An additional capability of the system is Dual Bus Multiview output. “A big request from our integrators was to add greater flexibility in allowing them to configure the system output options,” explained President of Vaddio, Rob Sheeley. “As a result of this feedback we now allow the system to be configured in several different ways including a Preview/Program mode, a Split Bus mode, where the system can be configured as two independent 1 x 6 switchers, and a third discreet multiviewer output for control and display.”

All inputs are autosensing for video resolution, control and camera type. Video inputs include five analog HD YPbPr video, RGBHV, SD (Y/C and CVBS) and a single DVI-I input on channel six that allows for multiple formats (DVI-D, YPbPr, RGBHV and HDMI) with 36 additional input resolutions. The Program and Preview outputs have both analog (YPbPr, RGBHV, Y/C and CVBS) and digital (DVI-D or HDMI) outputs. HD resolutions up to 1080/60p are supported.   

An additional capability of the system is Dual Bus Multiview output. This allows the user to switch the Preview and Program buses as discrete outputs – with one output going to an IMAG Projector and the other going to a recording device. The control surface includes a broadcast-style 3-axis Hall Effect Joystick with twist-handle zoom control and separate Pan, Tilt and Speed control knobs. Get an all-in-one camera control console with video mixing, built-in multiviewer and broadcast-quality effects.

This firmware upgrade is available at no charge for any customer who currently owns a ProductionVIEW HD MV. Contact Vaddio Tech Support at +1 (763) 971-4400 for assistance in loading the new firmware.

Vaddio Shipping ProductionVIEW HD-SDI MV Camera Control Console with Multiviewer

The ProductionVIEW HD-SDI MV is an all-in-one camera control console with HD-SDI/SDI video switching/mixing, a built-in multiviewer, lower screen graphics and automated control functionality.

“Our new Multi-View touch screen control panel layout options allow our integrators the ability to match their screen layout to the number of camera or computer input sources that they have connected to the system,” explained President of Vaddio, Rob Sheeley. “This way they can maximize the potential screen size available for previewing their live video feeds and not see unused multi-viewer input windows. The ProductionVIEW MV series of production switchers combines the best of Vaddio’s PTZ camera control technology with best-of-class digital SDI switching technology. Now with an integrated multiviewer functionality that includes touch screen control, we can’t think of a better customer experience than allowing the end user to visually control input sources, camera presets, and system control – all by just touching the screen.”

ProductionVIEW-HD-SDI MV

ProductionVIEW-HD-SDI MV


Vaddio’s TeleTouch multiviewer touch screen monitors allow switching of all live video feeds, and up to 12 video thumbnail presets can be created, recalled and stored by simply touching the monitor. The thumbnails are a snapshot of what the camera preset shot looks like, to make storing and recalling presets even easier. By touching a thumbnail, the camera will pan, tilt and zoom to that position.

An additional capability of the system is Dual Bus Multiview output. This allows the user to switch between Preview and Program as discrete outputs – with one going to an IMAG Projector and the other going to a recording device. You now have three options for configuring the system: Preview/Program mode, Dual Bus mode and a third discreet multiviewer output for control and display.

All inputs are autosensing for video resolution, control and camera type. Video inputs include five HD-SDI/SDI (480i to 1080p) inputs on BNC connectors and a single DVI-I input on channel six that allows for multiple formats (DVI-D, YPbPr, RGBHV and HDMI) with 36 additional input resolutions. The outputs have been enhanced to include both HD-SDI and HDMI outputs – a distinct advantage when choosing a set of inexpensive preview and program monitors or using Vaddio TeleTouch touch screen monitors.

The control surface includes a broadcast-style 3-axis Hall Effect Joystick with twist-handle zoom control and separate Pan, Tilt and Speed control knobs. Because ProductionVIEW HD-SDI MV is a live broadcast production console, not a computer, the entire system produces only one frame of delay – a critical requirement for live production where IMAG is used. 

FSR Builds a Bigger (Ceiling) Box

Woodland Park, NJ • FSR, manufacturer of audio and video switching, control products, and connectivity boxes, has announced the launch of a new ceiling box with a deeper design developed to accommodate applications requiring more internal equipment than the CB-12 and CB-22 models.

“The CB-224 is the largest unit in our popular CB Ceiling enclosure series,” commented Jan Sandri, FSR’s president. “Its capacity to support 50 pounds for a projector, and 12 pounds on each shelf makes it ideal for any venue requiring a robust ceiling mount.”

The unit is a perfect fit for conference centers, schools, meeting and training facilities, airports and museums. Its advanced deep box design has a pull-down 4 RU cage with gas-spring assisted ball-bearing slide. 2 RU of angle-adjustable rack-mounting surfaces on either end of the cage facilitate mounting and visibility of 1RU/2RU patch panels. 1-3/8” of clear space on both sides allows for wire bundles to traverse parallel to the cage after installation. Each side of the box has an edge-protected bundled cable inlet cavity, filled with flame retardant foam seal. The interior of the CB-224 is complete with 5 internal outlets, 1 external outlet, and a fan.

The CB-224 ceiling box is available in 4 versions: with or without a pole-mount for a projector, and both with or without “smart” electronics. The Smart Module brings Green Energy savings to the Ceiling Box by turning power on and off to non-critical equipment based on the current being drawn by the projector. In effect, when the projector is shut down, the non-critical devices in the ceiling box are power off as well, and when the projector is powered on, so are the other devices. This reduces the amount of power being consumed by the room when it is not in use.

The CB-224 is ETL listed and has approvals for safety (UL 60950-1) and visible smoke (UL-2043). Units are currently shipping.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

All FSR products are designed and manufactured in its Woodland Park, NJ facility. The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com.

###
FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

FSR To Showcase Affordable Fingertip Room Control System At ISE 2012

ISE Stand #7P215

Woodland Park, NJ (1 December 2011) — FSR, manufacturer of audio and video switching, control products, and connectivity boxes, will be showcasing their Flex-LT self-contained control system at ISE 2012. The award-winning, affordable system will be demonstrated in FSR’s Stand #7P215 beside the Company’s wide variety of table, wall, and floor boxes, Twister Pro transmission systems, and expanded IPS line of instant connectivity.

FSR’s FLEX-LT room control system offers a vast number of features, ability to operate a full-range of AV equipment with simple fingertip operation, and an appealing price point. The versatile unit mounts in a wall or sits on a surface to present an operator-friendly color touch screen. Non-technical users can operate the system effortlessly, control the various sources, change the volume, turn lights on and off, raise or lower the shades or screen, and much more with a simple touch.

The user friendly, easy-to-afford touch screen system is designed to accommodate educational facilities, entertainment, corporate and hospitality venues, and government installations of varying sizes and requirements. The FLEX-LT can control nearly every aspect of a room with a simple touch of a button.

The Flex Configuration Utility features an uncomplicated method to maximize system capabilities. The contractor merely follows drag ‘n drop programming methodology; eliminating the need to learn another programming language. This allows easier updates if system equipment changes.

The FLEX-LT family is available in 4 models to suit the needs of each installation. In addition, FSR offers Flex Remote, a Windows based application that can remotely control a Flex panel, and Flex Manager, a comprehensive Windows application to schedule, monitor and manage all of the Flex panels in an installation.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

All FSR products are designed and manufactured in its Woodland Park, NJ facility. The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com .

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

FSR To Launch European Version Of Its Successful Table Box At ISE 2012

ISE Stand #7P215

Woodland Park, NJ — FSR, manufacturer of audio and video switching, control products, and connectivity boxes, has announced plans to launch its T6E table box, a European version of its widely successful T6 model at ISE 2012. The unit will be on show alongside a full complement of AV products in Stand #7P215 at the RAI. The table box, FSR’s newest, answers the need for an expandable, elegant unit in a conference room environment.

“We are delighted to debut the T6E, a table box designed specifically for our European customers, at our first ISE exhibition!” exclaimed Jan Sandri, FSR’s president. “The unit has been extremely well received in every region where it’s been introduced, and we’re confident it will exceed expectations in the European market as well.”

The T6E provides easy access to audio/video equipment, computers, telephones or any device requiring electronic connectivity from a conference or boardroom table. The unit features two configurable compartments that can contain Wonpro universal power outlets and either keystone audio, video, control and data connectors, IPS plates or a cable pull option.

The T6E is available with a round or square cover in black, aluminum or brass to match the décor of the room. Both round and square shapes fit in a 152mm round hole making installation extremely simple. Its cover can be closed while in use with cables exiting through the milled openings.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

All FSR products are designed and manufactured in its Woodland Park, NJ facility. The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com .

FSR Contact: Jan Sandri
973-785-4347 • sales@fsrinc.com

Press Contact: Desert Moon Communications
Harriet Diener
845-512-8283 • harriet@desertmooncomm.com

IMT Delivers Media Private Cloud for Visual Data Media Services

Rhozet and EMC Isilon Scale-out NAS Essential in New Transcoding Workflows with Big Data Storage

Integrated Media Technologies, Inc. (IMT) has designed and implemented at Burbank’s Visual Data Media Services (VDMS) a new high performance transcoding system and shared storage workflow.  Key components in the new VDMS install are a Rhozet Carbon Coder transcode farm from Harmonic, Inc., combined with EMC Isilon’s no compromise scale-out NAS to create a large private cloud for asset management services.

John Trautman, CEO at VDMS, explained, “With IMT’s guidance, we have launched the backend infrastructure for our new and proprietary  asset management system that provides global broadcast file distribution and web publishing of all our clients’ digital assets.  With an optimized transcode platform and a large private cloud for storage, it makes managing and moving assets a straightforward and automated process.”

Pictured in Burbank, CA is John Trautman, CEO of Visual Data Media Services.

Visual Data Media Services has earned a solid reputation for quality, service and dependability by providing integrated end-to-end post-production solutions for over 15 years.  To meet the ever-evolving needs of television, feature film, and new media clients, VDMS focuses on the seamless repurposing and distribution of content for all media outlets, including Domestic Syndication, Network Broadcast, International Distribution, Home Video, Video-On-Demand, the Internet, and Mobile Devices.

As the industry transitions from physical asset inventories and distribution to digital catalogs and deliveries, it is increasingly difficult to manage assets and meet tightened delivery windows.  With a multitude of file formats, codec’s, and non-standard delivery platforms to deal with, the traditional methods no longer worked.

“We met with VDMS to determine the best of breed solution that would meet their workflow and performance needs,” explained IMT’s Jason Kranitz.  “Rhozet Carbon Coder was the most flexible of the transcoding products and fit their model nicely.  For the most comprehensive storage solution, Isilon provided the scalability and flexibility, plus the ultra-performance of their new X200 nodes.”

According to IMT’s Director of Architecture Jose Palencia, “The EMC Isilon system at VDMS accelerates high-concurrent and sequential throughput media applications, speeding access to massive amounts of critical data, dramatically reducing costs and complexity.”

The new Harmonic Rhozet and EMC Isilon X200 installation at VDMS enables clients to manage and distribute their content in a secure online environment.  Key features include customizable metadata schemas, file downloads, push files via Aspera, Smartjog and Signiant, full online asset screenings, and unlimited user access for client screenings to assist in licensing content.  All major formats and codec’s are supported.

“We realized we had to completely redesign our operation if we wanted to satisfy our clients and continue to grow at our current rapid pace,” remarked VDMS’s John Trautman.  “After many meetings with vendors at trade shows and interviewing a number of consulting companies, IMT clearly stood out.  They fully understood our complex workflows and gave us the media and storage networking solutions that are working flawlessly.  Obviously, we were under a time crunch, but after IMT’s strategy was finalized, we were able to get the entire project turned around in less than 60 days.”

ABOUT VISUAL DATA MEDIA SERVICES, INC.
Visual Data has earned its reputation for outstanding quality, service and dependability by providing integrated end-to-end post-production solutions for over 16 years.  Visual Data’s veteran management team, with over 85 years of combined industry knowledge, ensures that customers will be met with a high level of service and efficient turn-around on tight deadlines. Strategically integrated services, all under one roof, allow Visual Data to fulfill complex deliveries and solve difficult problems for clients with ease.
Learn more at:  http://www.visualdatainc.com

ABOUT INTEGRATED MEDIA TECHNOLOGIES, INC. (IMT)
IMT is a consulting, design, construction, and systems integration company providing scalable technology systems for business operations.  IMT addresses three major market sectors: Communications Media & Entertainment (CME), Information Technologies (IT), and Healthcare. Through an active engagement process, IMT consultants and engineers collect, interpret, refine, design, build and maintain technology systems that deliver optimum results for clients.
Learn more at: http://www.imtglobalinc.com    tel:  877.761.9770

 

PESA Introduces World’s First HDcctv-Compliant Routing Switcher

HDcctv 16X16 Routing Switcher

Compact 1RU HDcctv 16X16 Routing Switcher

Huntsville, Alabama – December 27, 2011 – PESA® today unveiled the new 16X16 PESA HDcctv Routing Switcher, the world’s first HDcctv routing switcher with full compliance to the HDcctv Alliance™ high-definition video interface standard for security and surveillance systems. With just a single RG-59 coax cable for each port, users can connect up to 16 HDcctv-compliant video cameras to the PESA HDcctv Routing Switcher and output up to 16 individual coax connections for HDcctv DVR or display devices. Designed specifically for high-definition video over coax, PESA’s new 16X16 HDcctv Routing Switcher features a compact 1RU enclosure, local or remote network control options and a redundant power supply and control card option.

“The PESA HDcctv Routing Switcher is the ultimate interface where multiple HDcctv cameras and DVR’s need to be shared or switched in the best quality format available,” said Dan Holland, PESA’s Vice President of Product Marketing. “HDcctv is based on proven uncompressed high definition video technology so there is no need to compromise quality or worry about dropped packets, latency, or bandwidth allocation issues normally found with IP based technology.”

With a compact frame design, the PESA HDcctv Routing Switcher uses full uncompressed video technology to distribute brilliant high resolution images from devices as far away as 100m over traditional RG-59 coax cable. With the 1.5Gbps enabled transport for each port, video resolutions for 720p and 1080p are evenly distributed without compression. Unlike IP-based switches and hubs using distributed 10Gbps backbone, PESA’s HDcctv Routing Switcher allocates a dedicated 1.5Gbps for each device connected to the router. In aggregate comparison to IP solutions, PESA’s 16X16 HDcctv compliant routing system provides over 24Gbps of non-blocking, non-compressed video switching.

Based on the HDcctv Alliance standard, all inputs are auto-equalized and outputs reclocked to transmit 720p25/30, 720p50/60, or 1080p25/30 video resolutions distances up to 100m (300ft). Two independent reference inputs allow easy selection of gen-lock from black burst or a tri-level sync source. The frame assembly features a front load / hot swappable matrix card and includes space for an optional redundant power supply and control module. Each HDcctv Routing Switcher provides control interfaces for PESA’s Ethernet control system or can be configured to support many third-party control systems. Additionally, the PESA HDcctv Routing Switcher easily supports an optional local pushbutton control panel, up to 80 remote control panels, or control via a unique PESA soft-panel – a software emulated version of control panels.

With almost four decades of proven technology development in high-quality broadcast switching products, PESA continues to be an innovative provider of future-proof video distribution product solutions. The PESA 16X16 HDcctv Routing Switcher is the world’s first fully compliant HDcctv Matrix Switch and PESA’s roadmap includes several other HDcctv matrix and signal processing devices to be introduced in 2012.

As customers analyze ever larger amounts of video data and need to derive more value and ROI from their investment in video security and surveillance equipment, the HDcctv standard continues to deliver cost-effective, full uncompressed video solutions for users looking to upgrade legacy CCTV systems or design new greenfield megapixel IP video systems.

”The enormous market opportunity for uncompressed HD surveillance video over coax is increasingly widely recognized in the security industry,” observed Todd Rockoff, executive director of HDcctv Alliance. “Realization of that market opportunity requires multi-vendor/brand compatibility, which is ensured by compliance with the HDcctv standard. By delivering the world’s first HDcctv-compliant matrix switch, PESA has contributed a critical component for enterprise-class HDcctv-based surveillance systems.”

About HDcctv Alliance
HDcctv Alliance® is the non-profit industry association that develops and promulgates the global specification for high-definition closed-circuit television (HDcctv). The V1.0 HDcctv specification is derived from broadcast industry standards for 100% digital serial transmission of uncompressed video over coaxial cable. However, HDcctv is planned to also transmit video over various media (including optical fiber and Cat5), and the HDcctv standard optimizes the interface to meet the needs of the surveillance market. The Alliance promotes industry adoption of HDcctv technology, and it provides education both to the surveillance equipment industry and to equipment buyers. HDcctv-compliant products bear the distinctive HDcctv logo that guarantees transmission distance and interoperability with other HDcctv-compliant products. The Alliance also offers an HDcctv Certificate for video surveillance system designers, installers, and dealers through an education program. An up-to-date list of HDcctv-compliant Products and Certified HDcctv Professionals is maintained at www.highdefcctv.org.

About PESA
As a leading provider of audio/video connectivity, PESA offers a wide selection of routing switchers, matrix switchers, extenders, converters, media extenders, and signal processing gear to support government, military, industrial, commercial, broadcast and mobile truck applications. PESA offers one of the widest ranges of AV products – from large scale fiber optic routing to single-point CAT-5 DVI extenders – each with the integrity and innovative high performance technology expected from PESA. Our products are available around the world from a leading team of channel partners offering local support and installation and all of our products are supported by 24/7 technical support. To learn more about our technologies and services visit www.pesa.com. PESA is located in Huntsville, Alabama with regional offices throughout the United States.
All products mentioned herein are trademarked property of their respective owners.

Contact Information
Dan Holland
VP, Product Marketing
256-726-9200
dholland@pesa.com

###

Sierra Video Announces Aspen™ 3232 Multi-format Routing Switcher

GRASS VALLEY, CA – Sierra Video today announced the release of the Aspen 3232, the first model in a new line of compact video 3G HD-SDI routing switchers. The Aspen line will be a line of general utility 3G HD-SDI routing switchers ideal for use in any video installation, including rental and staging applications, higher education facilities, houses of worship, hospitals, broadcast facilities and post production facilities. The Aspen 3232 is a multi-rate router compatible with 3G, HD-SDI and SDI signals from 19 Mb/s to 2.97 Gb/s (3G).

The Aspen 3232 is compact at only 2.5” deep and takes up just 2RU in a standard equipment rack. The Aspen 3232 is also tremendously energy efficient, requiring less than 32 Watts of power including the power consumed by its standard built-in routing switcher control system and front panel panel..

A unique feature of the Aspen 3232 is that, due to its advanced technology, this router can drive signals farther than most typical 3G HD-SDI routing switchers. The Aspen 3232HD3G can drive 3G signals over 500ft (155 meters using Belden 1694A cable).

The Aspen 3232 routing switcher is a format-flexible 3G HD-SDI routing switcher capable of handling all SMPTE serial digital video signal formats on every input of the router including SMPTE 424M, SMPTE 259M, SMPTE 344M and DVB-ASI up to 540 Mbps and 3G and HD-SDI video signals conforming to SMPTE 292M (1.485GBps single link). The Sierra Video Aspen 3232 router also provides user control of the Input Equalization and Output Re-clocking circuitry. When using non-SMPTE signals the Re-clockers can be bypassed if required, so they do not interfere with the signal.

The introduction of the Aspen 3232 coincides with the introduction of Sierra’s new control system architecture based on IP, SNMP, and a web interface. The Aspen 3232’s embedded controller can be accessed via the TCP-IP or RS 232/422 serial interface making it easy to integrate into any automation or control system. The built-in web server offers convenient control and setup functions and works with any OS, browser and most handheld devices.

The Aspen 3232 includes a front panel control lockout and offers the ability to create and launch salvos. Companion audio routers are also available for the Aspen 3232 and are controllable by the embedded controller. A redundant power supply option is also available.

The Aspen 3232 multi-format routing switcher is the first model in a line of compact Aspen routers to be introduced in coming months and it is currently available from Sierra Video Systems and its worldwide reseller network.

Digg Syndication Del.icio.us Syndication Google Syndication MyYahoo Syndication Reddit Syndication

Related Topics: New Products, News, Switchers |

About

Stay up to date on the latest technology news. Select press representatives post company news several times a day. Check back often to get the latest news on product releases, mergers and acquisitions, and product applications. To be included in this virtual press conference, please contact The Wire.

Calendar

July 2014
M T W T F S S
« Jun    
 123456
78910111213
14151617181920
21222324252627
28293031  

Your Account

Subscribe

Subscribe to RSS Feed

Subscribe to MyYahoo News Feed

Subscribe to Bloglines

Google Syndication